Multitool Belt & Disc Grinding Attachment 1220x50mm

PO482 | Multitool Belt & Disc Grinding Attachment 1220x50mm FEATURES The Multitool is a renowned Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding grinding sharpening shaping polishing and refinishing. • EFFICIENCY – Superior performance and a user friendly toolless belt change in under 5 seconds. • VERSATILITY – Grinding sanding or polishing in 4 positions on rubber contact wheel platen disc or free strapping. The unit can also be swivelled vertically or any position in between. • ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there allowing for finishing into sharp corners. • QUALITY CONSTRUCTION – Robust maintenance free with sealed ball bearings hardened and ground essential components and zinc plating. • 3 YEAR WARRANTY – Against faulty materials and workmanship even when used commercially. SPECIFICATIONS • 48 x 2 (1220 x 50mm) belt. • 7 (178mm) diameter disc. • 3 1/2 (89mm) diameter rubber contact wheel. • 5 1/2 (140mm) diameter drive wheel. • The 482 suits most popular 8 bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP though 3/4 HP is recommended. • Suits shaft sizes of 5/8 and 1/2 . A steel bush is supplied to adapt the drive wheel to 1/2 . • Fitting Kit supplied.