CC3015W3 – 15mm Band Width Retaining Clamps 30mm Diameter | W3 Features: Reinforced band tips for safety. Softened band edges. Wide variety of material and rubber options. Technical Spec: Band Width – 15mm Diameter – Ø 30mm Grade W3 – Stainless Band (1) Corrosion Resistance (min.Hour) IS0 9227 – 200 (2) (1) Band – 1.4016 Stainless DIN EN-10088-2 or equivalent (2) 10% red rust allowed on the total surface of W3 products after salt spray test Rubber Type – CR Colour – Black Temperature (C°) | -35 – +100 Ozone Resistance – Very Good Light Resistance – Very Good Fuel Resistance – Sufficent Oil Resistance – Good Alcohol Resistance – Good Acid Resistance – Good Base Resistance – Good KALE is certified with ISO TS 16949 ISO 9001 ISO 14001 management systems as per the expectations of the global automotive industry.
Related products
Bolts, Set Screws & Nuts - UNF (Nyloc)
$15.33 incl. GST
Bolts, Set Screws & Nuts - UNC (Nyloc)
$15.96 incl. GST
E-Clips & Retainer Springs
$20.90 incl. GST
Bolts, Set Screws & Nuts - UNF (Nyloc)
$19.64 incl. GST



Teng 10mm Hex Dr. 9mm Hex Cr-V Bit / L75mm
Teng 1/4in Dr. Palm Ratchet 45T
Teng 8pc TX Set With Ball Point End (Folding)
Teng 9pc Ball-End AF Hex Key Set - 5/64-3/8in
FORMULA AIRBRUSH CLEANING SET WITH SPRAY OUT POT AND BRUSHES
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
Teng 9pc Long Arm Ball-End TX Key Set - TX8-TX40
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
AMPLIFIED HARNESS TOYOTA 1992 - 2001 AMP RETENTION 15 PIN PLUG
AUTOMOTIVE BATTERY AGM 12V 12AH 780CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL 