Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI BLUE 400ML
$26.20 incl. GST
In stock
Related products
$157.99 incl. GST
$199.95 incl. GST
$429.95 incl. GST
$449.95 incl. GST



Teng 1/4in Dr. Palm Ratchet 45T
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Teng 11pc Retractable Bike Kit
ITM Geared Girder Trolley-5 Ton-100-305mm Beam Width
Teng 9pc Standard Metric Hex Key Set - 1.5- 10.0mm
Teng 2Pc 1/4in Hex FL0.8 x 4.0mm Bit mm(L)
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T 



