SANTINT S5 LOADING PLATE PAD1

SANTINT S5 LOADING PLATE PAD1

Installation of the new vibration pads are as follows:
1. Remove the pullout tray by pushing it all the way back and lifting up. This will allow you to remove the tray.
2. Remove the pullout tray guide rails by undoing the three screws (see second image).
3. Clean surface with isopropyl rubbing alcohol.
4. Apply double sided tape to pad (spray glue will also work)
5. Attach pad to base and reattached the pullout tray guide rails ensuring that the pad fits between the base and the guide rails.
6. Finally, install the pullout tray.