LOCTITE RETAINING COMPOUND (30013)

A low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005″in diameter
Adds up to 3,000 psi holding power
Recommended for parts that will need subsequent dismantling, i.e., retention of bearings onto shafts and into housings.
Typical applications: Augment press fits
Viscosity: 125cP
Cure Time: Fixture – 10 minutes Full – 24 hours
Max gap fill: 0.12mm
Temperature resistance: 150°C
Shear strength: 15.8 /mm2