Multitool Belt & Disc Grinding Attachment

PO362 | Multitool Belt & Disc Grinding Attachment Attachment for TM400-200 Bench Grinder 8in (200mm) Features The Multitool is a renowned Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding grinding sharpening shaping polishing and refinishing. • EFFICIENCY – Superior performance and a user friendly belt change of under 5 seconds. • VERSATILITY – Grinding sanding or polishing in 4 positions on rubber contact wheel platen disc or free strapping. The unit can also be swivelled vertically or any position in between. • ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there allowing for finishing into sharp corners. • QUALITY CONSTRUCTION – Robust maintenance free with sealed ball bearings hardened and ground essential components and zinc plating. • 3 YEAR WARRANTY – Against faulty materials and workmanship even when used commercially. Specifications • 36in x 2in (915 x 50mm) Belt (100 Grit) • 7in (178mm) Diameter Disc (120 Grit) • 3-1/2in (89mm) Diameter Rubber Contact Wheel • 5-1/2in (140mm) Diameter Drive Wheel • Suits most popular 6in or 8in Bench Grinders with a screw mounted wheel guard and a minimum of 1/3 HP • Suits grinder shaft sizes of 5/8in and 1/2in. A steel bush is supplied to adapt the drive wheel to 1/2in • Fitting Kit supplied.