CC1315W3 – 15mm Band Width Retaining Clamps 13mm Diameter | W3 Features: Reinforced band tips for safety. Softened band edges. Wide variety of material and rubber options. Technical Spec: Band Width – 15mm Diameter – Ø 13mm Grade W3 – Stainless Band (1) Corrosion Resistance (min.Hour) IS0 9227 – 200 (2) (1) Band – 1.4016 Stainless DIN EN-10088-2 or equivalent (2) 10% red rust allowed on the total surface of W3 products after salt spray test Rubber Type – CR Colour – Black Temperature (C°) | -35 – +100 Ozone Resistance – Very Good Light Resistance – Very Good Fuel Resistance – Sufficent Oil Resistance – Good Alcohol Resistance – Good Acid Resistance – Good Base Resistance – Good KALE is certified with ISO TS 16949 ISO 9001 ISO 14001 management systems as per the expectations of the global automotive industry.
Related products
Bolts, Set Screws & Nuts - UNF (Nyloc)
$14.81 incl. GST
Bolts, Set Screws & Nuts - UNF (Nyloc)
$15.33 incl. GST
Bolts, Set Screws & Nuts - UNC (Nyloc)
$15.96 incl. GST
E-Clips & Retainer Springs
$27.41 incl. GST



Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
Champion 30mm Brass Expansion (Frost) Plug -Cup Type -5pk
Champion 316/A4 M10 Spring Washer (A)
Champion 316/A4 M4 Spring Washer (A)
Champion 316/A4 M4 Flat Washer (A)
Champion M25 x 35mm x 1.0mm Nylon Washer - 25pk
Champion 30mm internal Circlip -10pk
Champion 30mm External Circlip -10pk
Champion E-Clip Suit 5/32 Shaft -50pk
Groz Inside Caliper 250mm
Champion 316/A4 M5 Flat Washer (A) 