Size: 11mmWidth x 8mmDepth x 1040mmLength
PRODUCT DESCRIPTION:
The MITSUBA classical RE belt type with mould cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The mould cog provides high flexibility and a good fit in the pulley grooves as well as lower operating temperature, which increase belts life.
APPLICATION:
The MITSUBA classical RE belt has a wide range of applications with high belt speeds and small pulley diameters. The belt allows immediate improvement of existing drives which use wrapped bets, providing overall benefits with regards to economy as well as power transmission and reliability of operation.



Champion M22 x 32mm x 2.5mm Aluminium Washer - 25pk
Champion E-Clip Suit 1/2 Shaft -50pk
ISL 370x3.6mm Low Profile Cable Tie - UV Blk - 100pk
Ehoma Heavy Duty C-Clamp 200mm x 90mm 2200kgp
Holemaker Silver Series Annular Cutter 44mmx25mm DOC
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb L/R
JUPIO CAMERA BATTERY CANON NB-5L 3.7V 850MAH
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
Groz 3/8in BSP F-R-L Unit 63CFM / 1800LPM
Ehoma General Duty C-Clamp 150mm x 75mm 1000kgp
ISL 300 x 7.5mm Nylon Releasable Cable Tie - Nat - 100pk
Teng 1/2in Ratchet Long Arm 45 Teeth 400mm
Groz 3/8in BSP Air Filter 80CFM / 2250LPM
Teng 9pc Long Arm TX Key Set - TX8-TX40 