-
×
FITTING KIT HYUNDAI ACCENT / KIA RIO 2005 - 2009 DOUBLE DIN (BLACK)
1 × $54.95 -
×
Champion M8 x 8mm Socket Grub Screw -10pk
1 × $13.86 -
×
A106 Mitsuba A/13 Classical V-Belt
1 × $15.62 -
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $19.64 -
×
Champion AF 15Amp Standard Blade Fuse (Blue) -20pk
1 × $22.79 -
×
Champion Blue Female insulated Push-On Spade Terminal -14pk
1 × $18.27 -
×
A118 Mitsuba A/13 Classical V-Belt
1 × $17.39
-
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $36.12 -
×
FITTING KIT HYUNDAI ELANTRA GT 2013 ON DOUBLE DIN (WITHOUT NAV) (HIGH GLOSS BLACK)
1 × $69.95 -
×
FITTING KIT MAZDA RX-8 2004 - 2008 DOUBLE DIN HIGH GLOSS
1 × $765.95 -
×
FITTING KIT HYUNDAI ELANTRA 2013 - 2015 DOUBLE DIN (BLACK)
1 × $69.95 -
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73 -
×
Champion M8 x 16mm Socket Grub Screw -10pk
1 × $17.96 -
×
A108 Mitsuba A/13 Classical V-Belt
1 × $15.92
-
×
A112 Mitsuba A/13 Classical V-Belt
2 × $16.50
-
×
Champion Retainer Spring To Suit 17/32in Shaft -50pk
1 × $27.41 -
×
Tactix Pipe Wrench 600mm/24in H/Duty
1 × $144.27 -
×
Champion Brass 1/4in 'T' Joiner
1 × $20.58 -
×
METRA 6" UNIVERSAL SPEAKER SPACER 1/2 INCH THICK
1 × $29.95 -
×
Champion M12 x 22mm x 2.5mm Aluminium Washer - 50pk
1 × $89.88 -
×
Teng 7pc Fold-Up Metric Hex Key Set - 1.5-6.0mm
1 × $33.60 -
×
A134 Mitsuba A/13 Classical V-Belt
1 × $19.74
-
×
Champion 1 - 1/2in Steel Welsh Plug - 10pk
1 × $86.73 -
×
A113 Mitsuba A/13 Classical V-Belt
1 × $16.65
-
×
13A1390 Mitsuba Automotive V-Belt, 13Avx, Avx13
1 × $13.16 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
1 × $20.90 -
×
FITTING KIT HOLDEN COMMODORE VY - VZ 2002 - 2007 DOUBLE DIN (GREY)
1 × $54.95 -
×
FITTING KIT FORD TRANSIT , FOCUS 2000 - 2006 DOUBLE DIN (BLACK)
1 × $46.95 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $96.29 -
×
A158 Mitsuba A/13 Classical V-Belt
1 × $23.28
-
×
2 DEGREES PREPAY SIM CARD WITH $20 CREDIT
1 × $40.00
11A1205 Mitsuba Automotive V-Belt, 11Avx, Avx11
$8.45
In stock
Size: 11mmWidth x 8mmDepth x 1205mmLength
PRODUCT DESCRIPTION:
The MITSUBA classical RE belt type with mould cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The mould cog provides high flexibility and a good fit in the pulley grooves as well as lower operating temperature, which increase belts life.
APPLICATION:
The MITSUBA classical RE belt has a wide range of applications with high belt speeds and small pulley diameters. The belt allows immediate improvement of existing drives which use wrapped bets, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products