-
×
Champion M8 x 16mm Socket Grub Screw -10pk
3 × $17.96 -
×
Champion Brass 3/8in x 1/8in BSP Reducing Socket
1 × $11.97 -
×
A144 Mitsuba A/13 Classical V-Belt
1 × $21.23 -
×
Teng 1000V VDE 3/8in Dr. Insulated Socket 13mm
1 × $33.60 -
×
Champion M8 x 20mm Stainless Set Screw 304/A2 -8pk
1 × $20.37 -
×
FITTING KIT MITSUBISHI 2007 - 2019 DOUBLE DIN (WITH MMCS RADIO) (CHARCOAL HIGH GLOSS)
2 × $89.95 -
×
Champion 8G x 1-1/2in Self-Tapping Screw Pan Tpx 304/A2-15pk
1 × $45.78 -
×
Champion 3/16in x 1in BSW Machine Screw Pan Ph 304/A2 -15pk
1 × $42.63 -
×
Ehoma General Duty Clamp 400mm x 175mm 1000kgp
1 × $154.04 -
×
Teng Cable Tie Gun 2.2-4.8mm Cap
1 × $101.22 -
×
A140 Mitsuba A/13 Classical V-Belt
1 × $20.63
-
×
AIRBRUSH PAINT 30ML COLOUR SHIFT EXTREME ABYSS ACRYLIC LACQUER SCALE MODELLERS SUPPLY
1 × $15.95 -
×
Champion M8 x 40mm Stainless Set Screw 304/A2 -8pk
1 × $31.50 -
×
ProEquip Welders Angle Clamp Vice
1 × $141.02 -
×
Champion M4 x 0.7 Stainless Hex Nut 304/A2 -30pk
1 × $13.76 -
×
A136 Mitsuba A/13 Classical V-Belt
1 × $20.04
-
×
Champion E-Clip Suit 3/8 Shaft -100pk
1 × $55.02 -
×
Champion E-Clip Suit 5/8 Shaft -10pk
2 × $18.27 -
×
HARNESS TOYOTA LEXUS SWC ADD ON WITH AUX-IN
1 × $17.95 -
×
Champion Tyre Inflator 0 -150 Psi / 0 -1050Kpa (Dual Chuck)
1 × $496.23 -
×
Ehoma General Duty C-Clamp 300mm x 125mm 1500kgp
1 × $237.72 -
×
Champion 3/16in / 4.8mm Red Ring Terminal -15pk
1 × $17.33 -
×
A116 Mitsuba A/13 Classical V-Belt
2 × $17.10
-
×
AUTOMOTIVE BATTERY AGM 12V 12AH 780CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
1 × $449.95 -
×
A101 Mitsuba A/13 Classical V-Belt
1 × $14.88
-
×
AMPLIFIED AUDI A2 / A3 / A4 / S3 / TT 1999 -2014
1 × $59.95 -
×
A104 Mitsuba A/13 Classical V-Belt
1 × $15.33
-
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73 -
×
FITTING KIT MAZDA 3 , AXELA 2004 - 2009 DOUBLE DIN (BLACK)
1 × $99.95 -
×
A115 Mitsuba A/13 Classical V-Belt
1 × $16.95
-
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $96.29 -
×
Champion 1/8in x 5/8in Roll Pin -20pk
1 × $14.18 -
×
A109 Mitsuba A/13 Classical V-Belt
1 × $16.07
-
×
A120 Mitsuba A/13 Classical V-Belt
1 × $17.69
-
×
Champion E-Clip Suit 1/2 Shaft -50pk
1 × $46.10 -
×
A158 Mitsuba A/13 Classical V-Belt
1 × $23.28
-
×
A108 Mitsuba A/13 Classical V-Belt
1 × $15.92
-
×
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
1 × $193.41 -
×
AERIAL ADAPTER UNIVERSAL ANTENNA CONNECTOR STANDARD (5 PACK) MALE - SOLDER
1 × $9.95 -
×
Champion 1/4 x 1/8in BSP Brass Single Union Elbow 90Deg (BP)
1 × $16.07 -
×
Champion E-Clip Suit 3/32 Shaft -50pk
1 × $13.86 -
×
AUTOMOTIVE BATTERY AGM 12V 12AH 600CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
1 × $379.95 -
×
A105 Mitsuba A/13 Classical V-Belt
1 × $15.47
11A1215 Mitsuba Automotive V-Belt, 11Avx, Avx11
$8.54
In stock
Size: 11mmWidth x 8mmDepth x 1215mmLength
PRODUCT DESCRIPTION:
The MITSUBA classical RE belt type with mould cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The mould cog provides high flexibility and a good fit in the pulley grooves as well as lower operating temperature, which increase belts life.
APPLICATION:
The MITSUBA classical RE belt has a wide range of applications with high belt speeds and small pulley diameters. The belt allows immediate improvement of existing drives which use wrapped bets, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products