-
×
A120 Mitsuba A/13 Classical V-Belt
1 × $35.37 -
×
Holemaker Silver Series Annular Cutter 36mmx50mm DOC
1 × $171.05 -
×
ProEquip Standard Welding Helmet #10 Fixed Lens
1 × $22.47 -
×
Teng 1/2in Ratchet Long Arm 45 Teeth 400mm
2 × $118.34 -
×
Drill Doctor Industrial 2.5-19mm Drill Bit Cap.
2 × $860.06 -
×
A136 Mitsuba A/13 Classical V-Belt
1 × $40.09
-
×
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
1 × $193.41 -
×
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
2 × $128.31 -
×
CERWIN VEGA 12" VMAXX SERIES 4 OHM DVC SUBWOOFER 2000W MAX *OVERSTOCKED SPECIAL*
1 × $429.95
-
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $49.25 -
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $36.12 -
×
A103 Mitsuba A/13 Classical V-Belt
2 × $30.36
-
×
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $110.46
-
×
A107 Mitsuba A/13 Classical V-Belt
1 × $31.54
-
×
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
1 × $22.16 -
×
Teng 1/2in Dr. Flex-Head Stubby Ratchet Handle 72T
2 × $147.21
-
×
Teng 9pc Standard Metric Hex Key Set - 1.5- 10.0mm
1 × $27.41 -
×
A156 Mitsuba A/13 Classical V-Belt
1 × $45.98
-
×
Holemaker Uni Shank Tinite (Tin) Cutter 44mmx50mm
1 × $247.49 -
×
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
1 × $431.03 -
×
ProMarine 12V Non-Automatic Sump/Bilge Pump - 500gmph
1 × $43.37 -
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $19.64 -
×
Teng 8pc TX Set With Ball Point End (Folding)
1 × $70.67 -
×
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
1 × $27.83 -
×
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
1 × $14.81 -
×
A114 Mitsuba A/13 Classical V-Belt
1 × $33.60
-
×
Teng 10pc 5.5mm Drill Bit (DIN338)
1 × $64.47 -
×
AIRBRUSH PAINT 30ML EFFECTS PRISMATIC SILVER ACRYLIC LACQUER SCALE MODELLERS SUPPLY
1 × $20.95 -
×
A112 Mitsuba A/13 Classical V-Belt
1 × $33.00
-
×
Holemaker Sheet Metal Cutter Set 13 Piece 8-20mm
1 × $360.78 -
×
Champion 1/4in Male Air -Line Coupling Nitto
1 × $31.92 -
×
A102 Mitsuba A/13 Classical V-Belt
1 × $30.06
-
×
Teng Mini Bits 72T Ratchet w/ 8mm Ring Spanner
1 × $65.52 -
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73 -
×
M7 Tail Pipe Chisel 175mm Long To Suit SC211C / SC212C
1 × $20.27 -
×
Holemaker Silver Series Annular Cutter 47mmx50mm DOC
1 × $240.03
-
×
A119 Mitsuba A/13 Classical V-Belt
1 × $35.06
-
×
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $105.95 -
×
Teng 7pc Fold-Up Metric Hex Key Set - 1.5-6.0mm
1 × $35.49 -
×
A113 Mitsuba A/13 Classical V-Belt
1 × $33.30
-
×
ITM Chain Block-Heavy Duty-2 Ton-3 Meter Lift
1 × $545.48 -
×
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
1 × $464.84
13A1190 Mitsuba Automotive V-Belt, 13Avx, Avx13
$27.05
In stock
Size: 13mmWidth x 9mmDepth x 1190mmLength
PRODUCT DESCRIPTION:
The MITSUBA classical RE belt type with mould cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The mould cog provides high flexibility and a good fit in the pulley grooves as well as lower operating temperature, which increase belts life.
APPLICATION:
The MITSUBA classical RE belt has a wide range of applications with high belt speeds and small pulley diameters. The belt allows immediate improvement of existing drives which use wrapped bets, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products