Size: 15.5mmWidth x 11.2mmDepth x 1490mmLength
PRODUCT DESCRIPTION:
The MITSUBA classical RE belt type with mould cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The mould cog provides high flexibility and a good fit in the pulley grooves as well as lower operating temperature, which increase belts life.
APPLICATION:
The MITSUBA classical RE belt has a wide range of applications with high belt speeds and small pulley diameters. The belt allows immediate improvement of existing drives which use wrapped bets, providing overall benefits with regards to economy as well as power transmission and reliability of operation.



HAIDA CLASSIC ROUND SLIM C-POL FILTER 67MM
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
Teng 1/2in Dr. 24in / 600mm Power Bar
Groz 2in Coarse To Fine Thread Drum Bung Converter
Teng 9pc Long Arm Ball-End TX Key Set - TX8-TX40
Teng 7pc Fold-Up AF Hex Key Set - 1/16-7/32in
A158 Mitsuba A/13 Classical V-Belt
Holemaker Uni Shank Tinite (Tin) Cutter 28mmx25mm
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
ITM Chain Block-Mini-250 kg-2 Meter Lift
3PK0495 Mitsuba Automotive Multi-Rib V-Belt
Teng 10pc 4.0mm Drill Bit (DIN338)
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
Teng 8pc TX Set With Ball Point End (Folding)
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
HAIDA SNAP-ON LENS CAP 62MM
HAIDA SNAP-ON LENS CAP 55MM
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
Champion 2.4mm Spn External Lock Rings - 100pk
Teng 1/2in Dr. 17in / 425mm Power Bar
Teng 4pc 1/2in Dr. Torx Bit Set-Tx45-Tx55
Champion Tyre Inflator 0 -150 Psi / 0 -1050Kpa (Dual Chuck)
Tactix Mallet Rubber 16oz (58mm) Black Fiberglass
NITECORE MH12PRO 3300 LUMEN USB-C RECHARGEABLE TACTICAL FLASHLIGHT 505 YARDS THROW
Groz Clear Pistol Grip Grease Gun 14oz/400gm
Champion E-Clip Suit 5/32 Shaft -50pk
Champion 1/8in x 3/4in Roll Pin -20pk 