PRODUCT DESCRIPTION
The MITSUBA classical RE Cog belt is engineered with specially formulated compound to give excellent sidewall wear resistance and bending stress resistance. The belts achieve most high speed and high torque drives with consid- erable ease and having excellent oil and heat resistance as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increase belt life.
APPLICATION
The MITSUBA classical RE Cog belt has a wide range of applications, especially in industrial drives with high belt speeds and small belt pulley diameters. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and redial.



Teng 6pc Dbl Ring Rat MM Offset Span Set - TC-Tray
Teng Ring Spanner 14 x 18mm - 40mm
ITM Lever Hoist-Heavy Duty-1.5 Ton-1.5 Meter Lift
Teng 1in Dr. Thin Wall Deep Impact Socket 28mm Din
Teng 7pc Fold-Up AF Hex Key Set - 1/16-7/32in
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Teng 11pc Retractable Bike Kit
Champion 10G x 1-1/2in S/Tapping Screw-Rsd-Ph-316/A4-10pk
Champion M12 x 22mm x 2.5mm Aluminium Washer - 50pk
Champion E-Clip Suit 3/8 Shaft -100pk
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
ITM Chain Block-Heavy Duty-5 Ton-6 Meter Lift
Champion E-Clip Suit 5/32 Shaft -50pk
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
Teng 5pc 11.0mm Drill Bit (Din338)
Teng 7pc Standard Torx Key Set-Tx10-Tx40
ITM Lever Hoist-Heavy Duty-9 Ton-1.5 Meter Lift
ProMarine Floating Phone Pouch - Black
DYNAMAT DYNACORE 1/2 HALF INCH 32" x 54" 1 SHEET
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb L/R
A101 Mitsuba A/13 Classical V-Belt
SCALE MODELLERS SUPPLY SYNTHETIC BRUSH SET 5PC
Teng Side Table & Paper Holder For Roll Cabs
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
Teng 8pc TX Set With Ball Point End (Folding)
ITM Lever Hoist-Heavy Duty-3 Ton-1.5 Meter Lift
Champion E-Clip Suit 3/32 Shaft -50pk
FITTING KIT MITSUBISHI 2007 - 2019 DOUBLE DIN (WITH MMCS RADIO) (CHARCOAL HIGH GLOSS)
Champion 24mm External Circlip - 25pk
ITM Geared Girder Trolley-1 Ton-64-152mm Beam Width
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
Teng 9pc Standard Metric Hex Key Set - 1.5- 10.0mm 