-
×
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
1 × $59.75 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
1 × $20.90 -
×
A136 Mitsuba A/13 Classical V-Belt
2 × $40.09 -
×
ISL 300 x 4.8mm UV Nylon Cable Tie - Blk. - 1000pk
1 × $185.54 -
×
FITTING KIT GM MUILT KIT 2006 ON DOUBLE DIN (BLACK)
1 × $49.95 -
×
FITTING KIT JEEP GRAND CHEROKEE / DODGE DURANGO 2011 - 2013 DOUBLE DIN (SIDE TRIMS) (BLACK)
1 × $49.95 -
×
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
2 × $14.81 -
×
Champion 1/8in x 5/8in Roll Pin -20pk
1 × $14.18 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $96.29 -
×
Champion 1/4in Univ. Air Line 2-Way Manifold Block Female
1 × $21.95 -
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $19.64 -
×
Teng 10pc 5.5mm Drill Bit (DIN338)
1 × $64.47 -
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $36.12 -
×
ITM Push Girder Trolley-3 Ton-100-305mm Beam Width
1 × $633.78 -
×
Champion E-Clip Suit 5/16 Shaft -50pk
1 × $20.37 -
×
ProMarine Kool Bag - 1000 x 400 x 350mm
1 × $254.63 -
×
MINI UPPER DOOR SHAFT - SANTINT S5
1 × $12.21 -
×
FITTING KIT HONDA CRV 2012 - 2017 (RM) DOUBLE DIN (CHARCOAL)
1 × $75.95 -
×
Champion E-Clip Suit 1/2 Shaft -50pk
2 × $46.10 -
×
AMPLIFIED HARNESS FORD 2003 - 2012 AMP INTEGRATION PLUG FOR SUBS
1 × $51.58 -
×
ISL 300 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $32.24 -
×
A112 Mitsuba A/13 Classical V-Belt
1 × $33.00
-
×
Champion E-Clip Suit 1/8 Shaft -50pk
1 × $14.49 -
×
A124 Mitsuba A/13 Classical V-Belt
2 × $36.54
-
×
FORMULA AIRBRUSH COMPRESSOR BLUE
1 × $149.95 -
×
A115 Mitsuba A/13 Classical V-Belt
1 × $33.89
-
×
ITM Geared Girder Trolley-10 Ton-114-305mm Beam Width
1 × $2,441.67 -
×
Champion 3/16in UNF Nylon insert Self-Locking Nut -20pk
1 × $15.33 -
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $48.93 -
×
FORMULA SUCTION AIRBRUSH DUAL ACTION 0.5MM BLUE
1 × $59.95 -
×
Pilot Pin 8mm To Suit 50mm Long TCT Cutters
1 × $66.89 -
×
Champion M22 x 32mm x 2.5mm Aluminium Washer - 25pk
1 × $134.40 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $34.19
-
×
Champion E-Clip Suit 5/8 Shaft -10pk
1 × $18.27 -
×
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
1 × $170.42 -
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
1 × $109.31 -
×
Groz HD Pistol Grip Grease Gun 450gm (5000PSI)
1 × $107.10 -
×
FITTING KIT NISSAN SENTRA 2020 - UP DOUBLE DIN (GLOSS BLACK / SILVER TRIM)
1 × $65.95 -
×
ProMarine Spare Leash for AS10 Paddle Board
1 × $28.14 -
×
ProEquip Folding Metal Wheel Chocks (Pair)
1 × $19.95 -
×
Teng 11pc Retractable Bike Kit
1 × $77.39 -
×
A118 Mitsuba A/13 Classical V-Belt
1 × $34.78
-
×
ISL 200 x 7.5mm Nylon Releasable Cable Tie - Nat - 100pk
1 × $38.43 -
×
A128 Mitsuba A/13 Classical V-Belt
1 × $37.72
-
×
AIRBRUSH PAINT 30ML COLOUR SHIFT TOXIC SPILL ACRYLIC LACQUER SCALE MODELLERS SUPPLY
1 × $13.95 -
×
Champion Retainer Spring To Suit 19/64in Shaft -50pk
1 × $24.68 -
×
Ehoma Standard Clamp Pad - To Suit H.D Clamps
1 × $17.33 -
×
A130 Mitsuba A/13 Classical V-Belt
1 × $38.31
SPAX1090 Mitsuba Wedge Cogged V-Belt
$26.04
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products