-
×
DYNAMAT DYNACORE 1/2 HALF INCH 32" x 54" 1 SHEET
1 × $199.95 -
×
A125 Mitsuba A/13 Classical V-Belt
1 × $36.84 -
×
Teng 10pc 5.0mm Drill Bit (DIN338)
1 × $46.94 -
×
Teng 10pc 5.5mm Drill Bit (DIN338)
1 × $64.47 -
×
A114 Mitsuba A/13 Classical V-Belt
1 × $33.60
-
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73 -
×
Ehoma General Duty Clamp 600mm x 175mm 1000kgp
1 × $219.14 -
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $19.64 -
×
Champion E-Clip Suit 5/8 Shaft -10pk
1 × $18.27 -
×
ISL 100 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $21.63 -
×
Ehoma General Duty Clamp 160mm x 80mm 300kgp
1 × $62.79 -
×
A100 Mitsuba A/13 Classical V-Belt
1 × $29.48
-
×
A136 Mitsuba A/13 Classical V-Belt
1 × $40.09
-
×
A104 Mitsuba A/13 Classical V-Belt
1 × $30.65
-
×
A128 Mitsuba A/13 Classical V-Belt
1 × $37.72
-
×
A115 Mitsuba A/13 Classical V-Belt
3 × $33.89
-
×
Champion 7/16in UNC Nylon insert Self-Locking Nut -5pk
1 × $14.70 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
1 × $20.90 -
×
A124 Mitsuba A/13 Classical V-Belt
1 × $36.54
-
×
Ehoma General Duty C-Clamp 150mm x 75mm 1000kgp
1 × $160.44 -
×
Teng 1/2in Dr. 24in / 600mm Power Bar
1 × $166.01 -
×
Groz Std. Lever Action Grease Gun 400gm (6000PSI)
1 × $71.72 -
×
A138 Mitsuba A/13 Classical V-Belt
1 × $40.67
-
×
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
1 × $139.13 -
×
ProEquip 3.5T Low Profile HD Trolley Jack (ANSI)
1 × $744.87 -
×
Champion E-Clip Suit 3/32 Shaft -50pk
1 × $13.86 -
×
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
1 × $243.81 -
×
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
1 × $203.28 -
×
Ehoma General Duty Clamp 400mm x 120mm 750kgp
1 × $153.62 -
×
ISL 280x4.6mm Low Profile Cable Tie - UV Blk - 100pk
1 × $17.33 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $34.19
-
×
Champion Tyre Inflator 0 -150 Psi / 0 -1050Kpa (Dual Chuck)
2 × $496.23 -
×
Holemaker Silver Series Annular Cutter 47mmx50mm DOC
1 × $240.03
SPAX1320 Mitsuba Wedge Cogged V-Belt
$31.82
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products