-
×
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $111.20 -
×
Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
1 × $16.70 -
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 9.5mm
2 × $23.84 -
×
Ehoma General Duty C-Clamp 250mm x 115mm 1200kgp
1 × $244.44 -
×
Champion E-Clip Suit 5/32 Shaft -50pk
2 × $18.80 -
×
Teng 8pc TX Set With Ball Point End (Folding)
1 × $70.67 -
×
A156 Mitsuba A/13 Classical V-Belt
3 × $58.75 -
×
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
1 × $23.42 -
×
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
1 × $203.28 -
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 19mm
1 × $46.94 -
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
1 × $114.66 -
×
ISL 350 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $30.35 -
×
A101 Mitsuba A/13 Classical V-Belt
1 × $38.03
-
×
COLBOR PL8-R RGB LED POCKET LIGHT
1 × $119.95
-
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $20.58 -
×
FM AUX TRANSMITTER WITH 3.5MM PLUG ADAPTER
1 × $69.95 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
1 × $21.95 -
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 13mm
1 × $69.93 -
×
A125 Mitsuba A/13 Classical V-Belt
2 × $47.07
-
×
ITM Chain Block-Heavy Duty-5 Ton-6 Meter Lift
1 × $1,177.47 -
×
Groz 3/8in BSP Regulator 88CFM / 2500LPM
1 × $103.22 -
×
Teng 1/2in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $147.21
-
×
Teng Ball-End Torx Key Tx25 Cr-V
1 × $17.33 -
×
A118 Mitsuba A/13 Classical V-Belt
1 × $44.44
-
×
A100 Mitsuba A/13 Classical V-Belt
1 × $37.66
-
×
Champion M8 x 40mm Socket Head Cap Screw-Din912-Gr12.9-6pk
2 × $26.88 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $43.69
-
×
Champion S/Tapping Screws - Mushroom Head - 5.5 x 19mm
1 × $79.28 -
×
DYNAMAT DYNADECK ULTRA-DURABLE CARPET REPLACEMENT 1.82M(6FT) (0.91M x 1.37M) 1 SHEET
1 × $649.95
-
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 13mm
2 × $23.84 -
×
A158 Mitsuba A/13 Classical V-Belt
1 × $59.49
-
×
Champion E-Clip Suit 3/32 Shaft -50pk
1 × $14.70 -
×
Teng Digital Torque Wrench 20 - 200Nm
1 × $1,233.54 -
×
ISL 300 x 7.5mm UV Nylon Releasable Cable Tie - Blk - 100pk
1 × $48.51 -
×
Tactix Pliers Linesman 8.5in/220mm
1 × $27.20 -
×
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
1 × $17.54 -
×
SCALE MODELLERS SUPPLY CERAMIC SCRAPER SINGLE BLADE REFILL
1 × $9.95 -
×
ProEquip Pressurised Sand Blaster 10 Gallon (37L)
1 × $477.33 -
×
HEATSHIELD HEADER / EXHAUST WRAP INFERNO 2" X 7M
1 × $264.95
-
×
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
1 × $464.84 -
×
Groz 3/8in BSP F-R-L Unit 63CFM / 1800LPM
1 × $295.05 -
×
A124 Mitsuba A/13 Classical V-Belt
1 × $46.69
SPAX850 Mitsuba Wedge Cogged V-Belt
$25.94
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products