-
×
A105 Mitsuba A/13 Classical V-Belt
1 × $30.94 -
×
A124 Mitsuba A/13 Classical V-Belt
1 × $36.54
-
×
Champion E-Clip Suit 5/16 Shaft -50pk
1 × $20.37 -
×
Champion M8 x 16mm Socket Grub Screw -10pk
1 × $17.96 -
×
HEATSHIELD THERMAFLECT SLEEVE 2-1/2" X 1M
1 × $164.95
-
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
2 × $48.93 -
×
ProEquip 250kg Transmission Cradle
1 × $132.51 -
×
KBS RUSTSEAL RUST PREVENTIVE COATING GLOSS BLACK 500ML
1 × $74.95
-
×
AMPLIFIED HARNESS TOYOTA 1992 - 2001 AMP RETENTION 15 PIN PLUG
1 × $34.95
-
×
Champion Tyre Inflator 0 -150 Psi / 0 -1050Kpa (Dual Chuck)
1 × $496.23 -
×
A104 Mitsuba A/13 Classical V-Belt
1 × $30.65
-
×
AERIAL ADAPTER UNIVERSAL ANTENNA CONNECTOR STANDARD (5 PACK) MALE - SOLDER
1 × $9.95
-
×
Champion 1/8in x 5/8in Roll Pin -20pk
1 × $14.18 -
×
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $105.95 -
×
A100 Mitsuba A/13 Classical V-Belt
2 × $29.48
-
×
Champion 3/16in UNF Nylon insert Self-Locking Nut -20pk
1 × $15.33 -
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $49.25 -
×
A113 Mitsuba A/13 Classical V-Belt
1 × $33.30
-
×
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
1 × $22.26 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $96.29 -
×
Groz 5:1 Ratio Air Dbl Acting Oil Pump (Stub) BSP
1 × $1,594.11 -
×
ISL 290 x 3.6mm Nylon Cable Tie - Nat. - 100pk
1 × $15.75 -
×
FITTING KIT CHRYSLER / JEEP / DODGE 2007 ON DOUBLE DIN (SIDE TRIMS) (BLACK)
1 × $54.95
-
×
A107 Mitsuba A/13 Classical V-Belt
1 × $31.54
-
×
FITTING KIT HYUNDAI SANTA FE 2007 - 2012 DOUBLE DIN (SILVER)
2 × $59.95
-
×
UNIVERSAL ANTENNA ADAPTER 2 X MALE TO 1 X FEMALE SOCKET
2 × $19.95
-
×
THB 40SH - 1/2in Socket Hose Coupler
1 × $17.64 -
×
Champion 7/16in UNC Nylon insert Self-Locking Nut -5pk
1 × $14.70 -
×
FITTING KIT MAZDA RX-8 2004 - 2008 DOUBLE DIN HIGH GLOSS
2 × $765.95
-
×
A128 Mitsuba A/13 Classical V-Belt
1 × $37.72
-
×
Champion E-Clip Suit 7/16 Shaft -30pk
2 × $36.12 -
×
ISL 300 x 4.8mm UV Nylon Cable Tie - Blk. - 1000pk
1 × $185.54 -
×
VIOFO DASHCAM 2K A119 V3 FRONT DVR WITH GPS DVR
1 × $266.33 -
×
BLACKVUE ANALOG VIDEO CABLE FOR DUAL CHANNEL DASHCAMS 15M
1 × $49.95 -
×
Champion M8 x 40mm Socket Head Cap Screw-Din912-Gr12.9-6pk
1 × $25.62 -
×
Teng Air Blow Gun 270mm
1 × $25.73 -
×
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
1 × $22.16 -
×
FITTING KIT LEXUS GS SERIES 1998 - 2003 DOUBLE DIN (BLACK)
1 × $52.95
-
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
1 × $109.31 -
×
ITM Lever Hoist-Heavy Duty-6 Ton-1.5 Meter Lift
1 × $1,046.64 -
×
HAIDA SNAP-ON LENS CAP 52MM
1 × $9.95
-
×
KBS RUSTSEAL RUST PREVENTIVE COATING GREY 250ML
1 × $49.95
-
×
KBS RUSTBLAST WATER BASED RUST REMOVER 250ML
1 × $19.95
-
×
Champion Retainer Spring To Suit 17/32in Shaft -50pk
1 × $27.41 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $34.19
SPAX900 Mitsuba Wedge Cogged V-Belt
$21.50
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products