-
×
Holemaker Silver Series Annular Cutter 41mmx25mm DOC
1 × $148.37 -
×
Holemaker Silver Series Annular Cutter 33mmx50mm DOC
1 × $144.90
-
×
A144 Mitsuba A/13 Classical V-Belt
3 × $42.44 -
×
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $110.46
-
×
A115 Mitsuba A/13 Classical V-Belt
1 × $33.89
-
×
A105 Mitsuba A/13 Classical V-Belt
1 × $30.94
-
×
A118 Mitsuba A/13 Classical V-Belt
1 × $34.78
-
×
A158 Mitsuba A/13 Classical V-Belt
1 × $46.56
-
×
FITTING KIT HONDA CIVIC ACCORD 1988 - 2002 DOUBLE DIN (BLACK)
1 × $58.53 -
×
A134 Mitsuba A/13 Classical V-Belt
1 × $39.49
-
×
1/2in Long Ratchet Flexible Head 45 Teeth 400mm
1 × $124.85 -
×
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $105.95 -
×
A113 Mitsuba A/13 Classical V-Belt
1 × $33.30
-
×
Champion M22 x 32mm x 2.5mm Aluminium Washer - 25pk
1 × $134.40 -
×
FITTING KIT CHRYSLER / JEEP / DODGE 2007 ON DOUBLE DIN (SIDE TRIMS) (BLACK)
1 × $54.95 -
×
Champion E-Clip Suit 3/32 Shaft -50pk
2 × $13.86 -
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73 -
×
Holemaker Silver Series Annular Cutter 45mmx50mm DOC
1 × $223.13
-
×
ITM 240V Electric Hoist-3 Ton-3 Meter Lift
1 × $7,406.49 -
×
Champion E-Clip Suit 5/32 Shaft -50pk
2 × $17.85 -
×
Champion M8 x 40mm Socket Head Cap Screw-Din912-Gr12.9-6pk
1 × $25.62 -
×
Teng 10pc 5.5mm Drill Bit (DIN338)
1 × $64.47 -
×
FITTING KIT SUZUKI GRAND VITARA , ESCUDO 2005 - 2019 DOUBLE DIN (BLACK)
1 × $55.95 -
×
Champion 1/8in x 5/8in Roll Pin -20pk
1 × $14.18 -
×
AMPLIFIED HARNESS NISSAN SKYLINE, 350Z 95 - 10 BOSE
1 × $53.43 -
×
Champion Retainer Spring To Suit 17/32in Shaft -50pk
1 × $27.41 -
×
A104 Mitsuba A/13 Classical V-Belt
2 × $30.65
-
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $48.93 -
×
Ehoma General Duty C-Clamp 250mm x 115mm 1200kgp
1 × $244.44 -
×
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
1 × $16.70 -
×
Holemaker Pilot Pin 4.73mmx102mm (12-14mm / 50mm DOC)
1 × $14.18 -
×
A108 Mitsuba A/13 Classical V-Belt
1 × $31.82
SPAX950 Mitsuba Wedge Cogged V-Belt
$22.70
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products