-
×
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
1 × $136.61 -
×
Champion 6mm x 25mm Roll Pin -20pk
1 × $27.20 -
×
A109 Mitsuba A/13 Classical V-Belt
1 × $16.07 -
×
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $105.95 -
×
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
1 × $33.29 -
×
ProMarine 12-24-32V Bilge Pump Automatic Float Switch (20A)
1 × $31.29 -
×
Teng 1/4in Dr. FRP Ratchet 45T DIN3122D
1 × $82.01 -
×
Champion M8 x 8mm Socket Grub Screw -10pk
3 × $13.86 -
×
Champion E-Clip Suit 1/2 Shaft -50pk
1 × $46.10 -
×
A102 Mitsuba A/13 Classical V-Belt
1 × $15.03
-
×
A124 Mitsuba A/13 Classical V-Belt
1 × $18.27
-
×
ProMarine Kool Bag - 750 x 400 x 350mm
1 × $243.50 -
×
A164 Mitsuba A/13 Classical V-Belt
1 × $24.17
-
×
Champion E-Clip Suit 5/32 Shaft -50pk
1 × $17.85 -
×
SCALE MODELLERS SUPPLY CERAMIC SCRAPER : BLADE REFILL PACK (3PC)
1 × $21.95 -
×
Champion M4 x 8mm Machine Screw P/H Phillips - 100pk
1 × $18.59 -
×
TacklePro TPR Soft Rubber Landing Net
1 × $76.76 -
×
Champion M22 x 35mm x 1.0mm Copper Washer -5pk
2 × $25.41 -
×
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $106.47 -
×
Ehoma H.D. Clamp 500mmx140mm 1200kgp (Changeable Pads)
1 × $262.19 -
×
A110 Mitsuba A/13 Classical V-Belt
1 × $16.20
-
×
Teng 4pc 1/2in Dr. Torx Bit Set-Tx45-Tx55
1 × $25.94 -
×
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
1 × $16.70 -
×
A134 Mitsuba A/13 Classical V-Belt
1 × $19.74
-
×
Champion 1/8in x 3/4in Roll Pin -20pk
1 × $14.81 -
×
A158 Mitsuba A/13 Classical V-Belt
1 × $23.28
-
×
Champion Crimp Terminals Bullet Male Red 4mm - 25pk
1 × $23.21 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
2 × $96.29 -
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
1 × $109.31 -
×
FM3000 COMPRESSOR CRANKCASE GASKET
1 × $19.95 -
×
FITTING KIT HYUNDAI ACCENT / KIA RIO 2005 - 2009 DOUBLE DIN (BLACK)
1 × $54.95 -
×
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
1 × $128.31 -
×
Teng 1/2in Dr. 24in / 600mm Power Bar
1 × $164.43 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
1 × $20.90 -
×
AIRBRUSH PAINT 30ML EFFECTS GLOW IN THE DARK ACRYLIC LACQUER SCALE MODELLERS SUPPLY
1 × $13.95 -
×
A105 Mitsuba A/13 Classical V-Belt
1 × $15.47
SPAX957 Mitsuba Wedge Cogged V-Belt
$11.43
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products