-
×
Champion E-Clip Suit 1/8 Shaft -50pk
1 × $15.12 -
×
FITTING KIT HYUNDAI SANTA FE 2012 - 2018 DOUBLE DIN (BLACK)
1 × $115.95 -
×
M7 Saw Blade 32TPI To Suit QD291 (Pack of 10)
1 × $53.45
-
×
A100 Mitsuba A/13 Classical V-Belt
1 × $37.66
-
×
A106 Mitsuba A/13 Classical V-Belt
2 × $39.91
-
×
Champion 7/16in UNC Nylon insert Self-Locking Nut -5pk
1 × $15.33 -
×
METRA CAR STEREO POCKET TOYOTA NISSAN MAZDA FORD
1 × $34.95
-
×
Teng 1/4in Dr. Ratchet Handle 72T
1 × $116.97 -
×
ITM 240V Electric Hoist-1 Ton-3 Meter Lift
1 × $4,582.31 -
×
AMPLIFIED HARNESS TOYOTA 1992 - 2001 AMP RETENTION 15 PIN PLUG
1 × $34.95
-
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $49.25 -
×
A120 Mitsuba A/13 Classical V-Belt
3 × $45.20
-
×
A158 Mitsuba A/13 Classical V-Belt
1 × $59.49
-
×
Teng EVA Knee Pad 450mm x 210mm
1 × $68.67 -
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 38mm
1 × $28.14 -
×
A136 Mitsuba A/13 Classical V-Belt
1 × $51.22
-
×
A111 Mitsuba A/13 Classical V-Belt
1 × $41.80
-
×
Teng 1/4in Dr. FRP Ratchet 45T DIN3122D
1 × $82.64 -
×
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
1 × $464.84 -
×
A105 Mitsuba A/13 Classical V-Belt
2 × $39.54
-
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $37.80 -
×
A109 Mitsuba A/13 Classical V-Belt
1 × $41.04
-
×
A114 Mitsuba A/13 Classical V-Belt
1 × $42.93
-
×
A164 Mitsuba A/13 Classical V-Belt
1 × $61.76
-
×
Teng Digital Torque Wrench 20 - 200Nm
1 × $1,233.54 -
×
Champion E-Clip Suit 5/32 Shaft -50pk
1 × $18.80 -
×
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
1 × $139.13 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
1 × $21.95 -
×
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
1 × $59.75 -
×
A119 Mitsuba A/13 Classical V-Belt
1 × $44.80
-
×
Champion 1/4in Female Brass Tyre Chuck
1 × $19.74 -
×
Champion M12 x 22mm x 2.5mm Aluminium Washer - 50pk
1 × $94.40 -
×
HARNESS TOYOTA LEXUS SWC ADD ON WITH AUX-IN
1 × $17.95
-
×
A113 Mitsuba A/13 Classical V-Belt
1 × $42.55
-
×
Groz 3/8in BSP Regulator 88CFM / 2500LPM
1 × $103.22 -
×
Drill Doctor Industrial 2.5-19mm Drill Bit Cap.
1 × $860.06 -
×
Teng 10pc 5.5mm Drill Bit (DIN338)
1 × $64.47 -
×
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
1 × $23.21
SPBX1500 Mitsuba Wedge Cogged V-Belt
$65.41
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products