-
×
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
1 × $203.18 -
×
A115 Mitsuba A/13 Classical V-Belt
2 × $43.30 -
×
FORMULA AIRBRUSH COMPRESSOR ROSE GOLD
1 × $149.95 -
×
Teng 1/2in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $147.21
-
×
ISL 200 x 4.8mm Nylon Cable Tie - Yellow - 100pk
1 × $16.91 -
×
Champion Tyre Inflator 0 -150 Psi / 0 -1050Kpa (Dual Chuck)
1 × $521.01 -
×
Champion Door Panel Clips Universal -10pk
1 × $21.32 -
×
ProEquip 12V/60W Oil Extractor/Suction Pump
1 × $97.55 -
×
Champion M8 x 40mm Socket Head Cap Screw-Din912-Gr12.9-6pk
2 × $26.88 -
×
Teng 9pc Ball-End AF Hex Key Set - 5/64-3/8in
1 × $50.72 -
×
ITM 240V Electric Hoist-2 Ton-6 Meter Lift
1 × $6,444.59 -
×
THB 40SH - 1/2in Socket Hose Coupler
1 × $17.64 -
×
Teng 8pc TX Set With Ball Point End (Folding)
1 × $70.67 -
×
ISL 200 x 4.8mm Nylon Cable Tie - Green - 100pk
1 × $16.91 -
×
Teng Air Blow Gun 270mm
1 × $25.73 -
×
A120 Mitsuba A/13 Classical V-Belt
1 × $45.20
-
×
Champion 8G x 12mm Mushroom Head S/Drilling Screw Ph -50pk
1 × $18.80 -
×
ISL 28 x 28mm Cable Tie mounting Base - Nat - 100pk
1 × $18.59 -
×
Groz 3/8in BSP F-R Unit 77CFM / 2200LPM
1 × $160.86
-
×
Teng 1/2in Dr. 24in / 600mm Power Bar
2 × $166.01 -
×
Teng 7pc Fold-Up AF Hex Key Set - 1/16-7/32in
1 × $34.86 -
×
AUTOVIEW ACAP TIMER RELAY
1 × $149.95 -
×
Teng 1/4in Dr. Palm Ratchet 45T
1 × $62.79 -
×
Champion 1/8in x 5/8in Roll Pin -20pk
2 × $14.81 -
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 9.5mm
1 × $63.74 -
×
A114 Mitsuba A/13 Classical V-Belt
1 × $42.93
-
×
ISL 370x7.6mm Low Profile Cable Tie - UV Blk - 100pk
1 × $42.00 -
×
HAIDA SNAP-ON LENS CAP 46MM
1 × $9.95
-
×
Champion E-Clip Suit 5/32 Shaft -50pk
1 × $18.80 -
×
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
1 × $59.75 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $101.01 -
×
A119 Mitsuba A/13 Classical V-Belt
1 × $44.80
-
×
Champion E-Clip Suit 1/8 Shaft -50pk
1 × $15.12 -
×
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
1 × $17.54 -
×
A144 Mitsuba A/13 Classical V-Belt
1 × $54.22
-
×
Teng 1/4in Dr. FRP Ratchet 45T DIN3122D
1 × $82.64 -
×
Drill Doctor 19mm Chuck To Suit DD500X & DD750X
1 × $410.87 -
×
A136 Mitsuba A/13 Classical V-Belt
1 × $51.22
-
×
Champion M22 x 32mm x 2.5mm Aluminium Washer - 25pk
1 × $141.23 -
×
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
1 × $134.82 -
×
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $110.46
-
×
A107 Mitsuba A/13 Classical V-Belt
1 × $40.30
-
×
A108 Mitsuba A/13 Classical V-Belt
1 × $40.66
SPBX2360 Mitsuba Wedge Cogged V-Belt
$102.91
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products