-
×
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
1 × $203.28 -
×
Champion S/Tapping Screws - Mushroom Head - 5.5 x 19mm
1 × $79.28 -
×
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
2 × $59.75 -
×
A136 Mitsuba A/13 Classical V-Belt
1 × $51.22 -
×
Champion S/Tapping Screws - Mushroom Head - 5.5 x 25mm
1 × $23.84 -
×
Champion M8 x 16mm Socket Grub Screw -10pk
1 × $18.90 -
×
A108 Mitsuba A/13 Classical V-Belt
3 × $40.66
-
×
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $110.46
-
×
Champion S/Tapping Screws - Mushroom Head - 4.8 x 38mm
1 × $91.56 -
×
Champion 7/16in UNC Nylon insert Self-Locking Nut -5pk
1 × $15.33 -
×
Groz 1/2in BSP Air Filter 125CFM / 3500LPM
1 × $101.96 -
×
A125 Mitsuba A/13 Classical V-Belt
1 × $47.07
-
×
A100 Mitsuba A/13 Classical V-Belt
1 × $37.66
-
×
Teng 1/2in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $147.21
-
×
A116 Mitsuba A/13 Classical V-Belt
1 × $43.69
-
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $101.01 -
×
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
1 × $15.44 -
×
TacklePro Inchiku Lure 80gm - Red Terror
1 × $17.33 -
×
Champion Retainer Spring To Suit 17/32in Shaft -50pk
2 × $28.67 -
×
Holemaker Cutting Fluid 20 Litre
1 × $453.92 -
×
HAIDA CLASSIC ROUND SLIM C-POL FILTER 77MM
1 × $64.95
-
×
METRA CAR STEREO POCKET TOYOTA NISSAN MAZDA FORD
1 × $34.95
-
×
A156 Mitsuba A/13 Classical V-Belt
1 × $58.75
-
×
A115 Mitsuba A/13 Classical V-Belt
1 × $43.30
-
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $37.80 -
×
A158 Mitsuba A/13 Classical V-Belt
2 × $59.49
-
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
2 × $20.58 -
×
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
2 × $179.03 -
×
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $111.20 -
×
A134 Mitsuba A/13 Classical V-Belt
1 × $50.46
-
×
Champion E-Clip Suit 3/8 Shaft -100pk
1 × $57.65 -
×
Champion S/Tapping Screws - Mushroom Head - 4.8 x 25mm
1 × $72.35 -
×
A173 Mitsuba A/13 Classical V-Belt
1 × $65.14
SPBX2950 Mitsuba Wedge Cogged V-Belt
$128.65
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products