-
×
Champion E-Clip Suit 1/8 Shaft -50pk
1 × $14.49 -
×
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
4 × $22.26 -
×
A130 Mitsuba A/13 Classical V-Belt
1 × $38.31 -
×
Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
1 × $15.96 -
×
Champion Retainer Spring To Suit 19/64in Shaft -50pk
2 × $24.68 -
×
Champion 1/8in x 3/4in Roll Pin -20pk
1 × $14.81 -
×
Groz 3/8in BSP Air Filter 80CFM / 2250LPM
1 × $76.76 -
×
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
2 × $22.16 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
3 × $96.29 -
×
Ehoma General Duty Clamp 800mm x 120mm 1000kgp
1 × $214.94 -
×
A118 Mitsuba A/13 Classical V-Belt
1 × $34.78
-
×
Groz 1/4in BSP Oil Mist Lubricator 48CFM / 1350LPM
1 × $61.22 -
×
ITM 240V Electric Hoist-3 Ton-6 Meter Lift
1 × $8,369.03 -
×
A138 Mitsuba A/13 Classical V-Belt
1 × $40.67
-
×
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
1 × $14.81 -
×
A109 Mitsuba A/13 Classical V-Belt
1 × $32.12
-
×
Ehoma Pivot Handle Clamp 300mm x 140mm 670kgp
1 × $172.20 -
×
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
1 × $203.28 -
×
Groz 5:1 Ratio Air Dbl Acting Oil Pump (Stub) BSP
1 × $1,594.11 -
×
A144 Mitsuba A/13 Classical V-Belt
1 × $42.44
-
×
Ehoma Extra H.D. Clamp 300x175mm 2200kgp Changebl Pads
1 × $428.30 -
×
METRA CAR STEREO POCKET TOYOTA NISSAN MAZDA FORD
1 × $34.95 -
×
Champion E-Clip Suit 3/32 Shaft -50pk
1 × $13.86 -
×
Teng 9pc Long Arm TX Key Set - TX8-TX40
1 × $60.90 -
×
A102 Mitsuba A/13 Classical V-Belt
1 × $30.06
-
×
Champion E-Clip Suit 1/2 Shaft -50pk
1 × $46.10 -
×
A116 Mitsuba A/13 Classical V-Belt
2 × $34.19
-
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $36.12 -
×
Ehoma General Duty C-Clamp 250mm x 115mm 1200kgp
1 × $244.44 -
×
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
2 × $105.95 -
×
FITTING KIT HONDA ACCORD 2003 - 2007 DOUBLE DIN (LOWER DASH KIT) (BLACK)
1 × $84.95 -
×
A124 Mitsuba A/13 Classical V-Belt
1 × $36.54
-
×
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
1 × $170.42 -
×
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
1 × $193.41 -
×
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
1 × $128.31 -
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73
SPZX1087 Mitsuba Wedge Cogged V-Belt
$18.55
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products