-
×
Champion E-Clip Suit 5/8 Shaft -10pk
2 × $19.22 -
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $24.78 -
×
A104 Mitsuba A/13 Classical V-Belt
1 × $39.17 -
×
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
1 × $23.42 -
×
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
2 × $17.54 -
×
Ehoma General Duty Clamp 100mm x 50mm 220kgp
1 × $45.26 -
×
ProEquip Auto Darkening Filter For PE7139 (90 X 110 X 9mm)*
1 × $94.08 -
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
1 × $114.66 -
×
Groz Spill Proof Funnel 3.0L (240mm) C/W Wire Mesh
1 × $37.38 -
×
Champion 1/8in x 5/8in Roll Pin -20pk
1 × $14.81 -
×
A156 Mitsuba A/13 Classical V-Belt
1 × $58.75
-
×
SANTINT V100 MR-6 ROCKER SWITCH
1 × $25.00
-
×
A144 Mitsuba A/13 Classical V-Belt
1 × $54.22
-
×
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
2 × $15.44 -
×
A106 Mitsuba A/13 Classical V-Belt
3 × $39.91
-
×
A114 Mitsuba A/13 Classical V-Belt
2 × $42.93
-
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $37.80 -
×
ProMarine Car Roof Rack Pads
1 × $76.76 -
×
A109 Mitsuba A/13 Classical V-Belt
1 × $41.04
-
×
Champion M8 x 8mm Socket Grub Screw -10pk
1 × $14.70 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
2 × $101.01 -
×
Groz 1/4in BSP Regulator 21CFM / 600LPM
1 × $66.78 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $43.69
-
×
A119 Mitsuba A/13 Classical V-Belt
2 × $44.80
-
×
A120 Mitsuba A/13 Classical V-Belt
1 × $45.20
-
×
TacklePro Inchiku Lure 100gm - Purple Piranha
1 × $18.48 -
×
Champion 3/16in UNF Nylon insert Self-Locking Nut -20pk
1 × $16.07 -
×
HARNESS TOYOTA LEXUS SWC ADD ON WITH AUX-IN
1 × $17.95
-
×
A158 Mitsuba A/13 Classical V-Belt
1 × $59.49
-
×
Teng 9pc Ball-End AF Hex Key Set - 5/64-3/8in
1 × $50.72 -
×
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
2 × $23.21 -
×
Champion Retainer Spring To Suit 19/64in Shaft -50pk
2 × $25.73 -
×
FITTING KIT MAZDA 6 , CX5 2012 - 2016 DOUBLE DIN (BLACK)
1 × $65.95
-
×
A113 Mitsuba A/13 Classical V-Belt
1 × $42.55
-
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $20.58 -
×
JUPIO POWERLED 150 LED LIGHT - TAKES NPF SERIES BATTERY
1 × $129.95 -
×
A111 Mitsuba A/13 Classical V-Belt
1 × $41.80
-
×
ProMarine 12V Non-Automatic Sump/Bilge Pump - 750gmph
1 × $50.09 -
×
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
1 × $179.03 -
×
Champion E-Clip Suit 1/8 Shaft -50pk
1 × $15.12 -
×
FITTING KIT NISSAN SENTRA 2020 - UP DOUBLE DIN (GLOSS BLACK / SILVER TRIM)
1 × $65.95
-
×
Champion M8 x 40mm Socket Head Cap Screw-Din912-Gr12.9-6pk
1 × $26.88 -
×
A110 Mitsuba A/13 Classical V-Belt
1 × $41.42
-
×
A164 Mitsuba A/13 Classical V-Belt
1 × $61.76
-
×
A136 Mitsuba A/13 Classical V-Belt
1 × $51.22
-
×
Champion M12 x 22mm x 2.5mm Aluminium Washer - 50pk
1 × $94.40 -
×
Groz 1/4in BSP Air Filter 28CFM / 800LPM
1 × $52.82 -
×
A101 Mitsuba A/13 Classical V-Belt
1 × $38.03
SPZX1750 Mitsuba Wedge Cogged V-Belt
$38.16
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products