-
×
A138 Mitsuba A/13 Classical V-Belt
2 × $40.67 -
×
A108 Mitsuba A/13 Classical V-Belt
2 × $31.82
-
×
FITTING KIT GM MUILT KIT 2006 ON DOUBLE DIN (BLACK)
1 × $49.95 -
×
ITM Geared Girder Trolley-3 Ton-88-203mm Beam Width
1 × $718.20 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $34.19
-
×
A164 Mitsuba A/13 Classical V-Belt
1 × $48.33
-
×
A136 Mitsuba A/13 Classical V-Belt
1 × $40.09
-
×
A107 Mitsuba A/13 Classical V-Belt
2 × $31.54
-
×
A120 Mitsuba A/13 Classical V-Belt
1 × $35.37
-
×
Holemaker Cutting Fluid 20 Litre
1 × $453.92 -
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73 -
×
A111 Mitsuba A/13 Classical V-Belt
1 × $32.72
-
×
HEATSHIELD RACERS TAPE 25MM X 3.6M
1 × $75.95 -
×
ITM 240V Electric Hoist-3 Ton-3 Meter Lift
1 × $7,406.49 -
×
ISL 300 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $32.24 -
×
A134 Mitsuba A/13 Classical V-Belt
1 × $39.49
-
×
ITM 240V Electric Hoist-500kg-6 Meter Lift
1 × $4,614.23 -
×
BLACKVUE ANALOG VIDEO CABLE FOR DUAL CHANNEL DASHCAMS 10M
1 × $37.95
HEATSHIELD THERMAFLECT SLEEVE 2″ X 1M
$154.95 incl. GST
In stock
Shield your wiring, lines, and cables safe from heat, without disassembling them. Thermaflect Sleeve acts as a thermal barrier capable of reflecting up to 90% of radiant heat away (requires minimum of 1″ of airspace and good aiflow). It is excellent to use as a fuel line heat sleeve, on wiring looms, air intake, intercooler pipes, and air conditioner hoses. By keeping fuel and air intake temperatures cool it helps to prevent vapor lock, improves performance, improves mileage and also reduces fuel evaporation and vapor lock.
Wait there is more; a 3′ length our Thermaflect Sleeve weighs less than 6″ of the silicone covered stuff of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve withstands 1100-degrees Fahrenheit of continuous radiant heat and 500-degrees Fahrenheit direct heat. This fuel line heat sleeve is also available in sewn seam.
Features:
-
Capable of reflecting up to 90% of radiant heat
-
Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
-
Made in the USA
Installation Tips:
- Face velcro seam in opposite direction of heat source
- Be sure ends of sleeve are sealed or secured to component you are trying to protect. You can seal the ends using our Thermaflect Tape, Cool Foil Tape, Thermal-Tie, shrink tube, or any mechanical fastener. Securing the ends will ensure no hot air sneaks in behind the sleeve, thus allowing it to work more efficiently.
- It also functions better if the heat shield sleeve is tight on the component
Related products
