Description
- ISO DIN radio provision with pocket
- ISO Double DIN radio provision
- Painted charcoal with a matte black center
- Touchscreen interface for climate and personalization features
- Two included trim panels allow the aftermarket radio to be mounted in top or bottom locations
- Provides accessory power (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Provides NAV outputs (parking brake – reverse – speed sense)
- Retains factory steering wheel controls
- Retains SYNC
- Retains the factory AUX-IN jack
- Provides an aftermarket backup camera input
- Can be used in both amplified and non-amplified models
- Retains balance and fade
- Micro B USB updatable
Wiring and Antenna Connections
- Harness
- Axxess interface and wiring harness included
- Antenna Adapter
- Included
- Steering wheel control interface
- Included
Applications
- Ford
- Mustang 2010 – 2014



SANTINT A3 80W24V DC TURBINE GEAR MOTOR (60R)
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
Champion M12 x 22mm x 2.5mm Aluminium Washer - 50pk
Teng 6in Long Nose Power Grip Plier Narrow Jaw
Champion S/Tapping Screws - Mushroom Head - 4.2 x 13mm
Champion Retainer Spring To Suit 19/64in Shaft -50pk
Champion 7/16in UNC Nylon insert Self-Locking Nut -5pk
ITM 240V Electric Hoist-1 Ton-3 Meter Lift
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
Champion Retainer Spring To Suit 7/32in Shaft -50pk
ITM Geared Girder Trolley-2 Ton-88-203mm Beam Width
Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
Teng 1/2in Dr. 17in / 425mm Power Bar
ISL 370x3.6mm Low Profile Cable Tie - UV Blk - 100pk
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
ITM Geared Girder Trolley-1 Ton-64-152mm Beam Width
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
Champion E-Clip Suit 5/32 Shaft -50pk
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
Champion S/Tapping Screws - Mushroom Head - 4.8 x 38mm
Groz 1:1 Ratio Air Dbl Acting Oil Pump (Stub) BSP
ITM Geared Girder Trolley-5 Ton-100-305mm Beam Width
Champion S/Tapping Screws - Mushroom Head - 5.5 x 19mm
ProEquip Universal Welding Cart
Champion E-Clip Suit 1/2 Shaft -50pk
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
Holemaker Silver Series Annular Cutter 44mmx50mm DOC
Ehoma General Duty Clamp 800mm x 120mm 1000kgp
Champion Retainer Spring To Suit 11/64in Shaft -50pk
ProEquip Rubber Anti-Fatigue Mat 1500x900x8mm
Teng 9pc Long Arm TX Key Set - TX8-TX40
Teng 9pc Long Arm Ball-End TX Key Set - TX8-TX40
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
Champion E-Clip Suit 3/16 Shaft -50pk
ITM Push Girder Trolley-2 Ton-88-203mm Beam Width
ITM Chain Block-Heavy Duty-3 Ton-3 Meter Lift
THB Inline Coupler 3 Way Single Action