CC1015W3 – 15mm Band Width Retaining Clamps 10mm Diameter | W3 Features: Reinforced band tips for safety. Softened band edges. Wide variety of material and rubber options. Technical Spec: Band Width – 15mm Diameter – Ø 10mm Grade W3 – Stainless Band (1) Corrosion Resistance (min.Hour) IS0 9227 – 200 (2) (1) Band – 1.4016 Stainless DIN EN-10088-2 or equivalent (2) 10% red rust allowed on the total surface of W3 products after salt spray test Rubber Type – CR Colour – Black Temperature (C°) | -35 – +100 Ozone Resistance – Very Good Light Resistance – Very Good Fuel Resistance – Sufficent Oil Resistance – Good Alcohol Resistance – Good Acid Resistance – Good Base Resistance – Good KALE is certified with ISO TS 16949 ISO 9001 ISO 14001 management systems as per the expectations of the global automotive industry.
Global Cable Clamp/P-Clip 10 x 15mm W3 (10pc)
$32.45 incl. GST
In stock
Related products
Bolts, Set Screws & Nuts - UNC (Nyloc)
$15.96 incl. GST
Bolts, Set Screws & Nuts - UNF (Nyloc)
$14.81 incl. GST
Bolts, Set Screws & Nuts - UNF (Nyloc)
$19.64 incl. GST
E-Clips & Retainer Springs
$23.73 incl. GST



Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
DYNAMAT DYNACORE 1/2 HALF INCH 32" x 54" 1 SHEET
Champion M8 x 16mm Socket Grub Screw -10pk
A103 Mitsuba A/13 Classical V-Belt
Champion E-Clip Suit 5/8 Shaft -10pk
Champion 1/8in x 3/4in Roll Pin -20pk
AUTOMOTIVE BATTERY AGM 12V 12AH 600CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
FORMULA SUCTION AIRBRUSH DUAL ACTION 0.5MM BLUE
ProEquip 20000kg Air Hydraulic Service Jack (AS/NZS)
THB 40SH - 1/2in Socket Hose Coupler
Champion Retainer Spring To Suit 19/64in Shaft -50pk
Champion E-Clip Suit 7/16 Shaft -30pk
Groz 14pc Punch And Chisel Set
Champion E-Clip Suit 5/32 Shaft -50pk
Champion 3/16in UNF Nylon insert Self-Locking Nut -20pk
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
Champion M22 x 32mm x 2.5mm Aluminium Washer - 25pk
ProEquip 400mm 1000W Industrial Ventilation Fan
Tactix F-Clamp 300 x 50mm
Teng 1/2in Dr. 24in / 600mm Power Bar
Champion Retainer Spring To Suit 11/64in Shaft -50pk
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
ITM Lever Hoist-Heavy Duty-3 Ton-1.5 Meter Lift
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
Champion 1/8in x 5/8in Roll Pin -20pk
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb 