CC1215W3 – 15mm Band Width Retaining Clamps 12mm Diameter | W3 Features: Reinforced band tips for safety. Softened band edges. Wide variety of material and rubber options. Technical Spec: Band Width – 15mm Diameter – Ø 12mm Grade W3 – Stainless Band (1) Corrosion Resistance (min.Hour) IS0 9227 – 200 (2) (1) Band – 1.4016 Stainless DIN EN-10088-2 or equivalent (2) 10% red rust allowed on the total surface of W3 products after salt spray test Rubber Type – CR Colour – Black Temperature (C°) | -35 – +100 Ozone Resistance – Very Good Light Resistance – Very Good Fuel Resistance – Sufficent Oil Resistance – Good Alcohol Resistance – Good Acid Resistance – Good Base Resistance – Good KALE is certified with ISO TS 16949 ISO 9001 ISO 14001 management systems as per the expectations of the global automotive industry.
Global Cable Clamp/P-Clip 12 x 15mm W3 (10pc)
$39.90 incl. GST
In stock
Related products
Bolts, Set Screws & Nuts - UNC (Nyloc)
$15.96 incl. GST
E-Clips & Retainer Springs
$23.73 incl. GST
E-Clips & Retainer Springs
$27.41 incl. GST
Bolts, Set Screws & Nuts - UNF (Nyloc)
$14.81 incl. GST



Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
Teng 1/2in Dr. 17in / 425mm Power Bar
M7 Deep Impact Socket 1/2in Dr. 29mm
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
M7 Cutting Chisel 175mm Long To Suit SC211C / SC212C
TacklePro Inchiku Lure 20gm - Orange Impaler
Groz Lever Action Spin-On Grease Gun 400gm
Teng 8pc TX Set With Ball Point End (Folding)
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
Teng 7pc Fold-Up AF Hex Key Set - 1/16-7/32in
Groz Kt2-5 Knurl Tool Holder
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb L/R
DYNAMAT DYNACORE 1/2 HALF INCH 32" x 54" 1 SHEET 