CC1915W3 – 15mm Band Width Retaining Clamps 19mm Diameter | W3 Features: Reinforced band tips for safety. Softened band edges. Wide variety of material and rubber options. Technical Spec: Band Width – 15mm Diameter – Ø 19mm Grade W3 – Stainless Band (1) Corrosion Resistance (min.Hour) IS0 9227 – 200 (2) (1) Band – 1.4016 Stainless DIN EN-10088-2 or equivalent (2) 10% red rust allowed on the total surface of W3 products after salt spray test Rubber Type – CR Colour – Black Temperature (C°) | -35 – +100 Ozone Resistance – Very Good Light Resistance – Very Good Fuel Resistance – Sufficent Oil Resistance – Good Alcohol Resistance – Good Acid Resistance – Good Base Resistance – Good KALE is certified with ISO TS 16949 ISO 9001 ISO 14001 management systems as per the expectations of the global automotive industry.



Holemaker Sheet Metal Cutter Set 13 Piece 8-20mm
Teng 10pc 5.5mm Drill Bit (DIN338)
Teng 10pc 4.2mm Drill Bit (Din338)
Teng 10pc 4.0mm Drill Bit (DIN338)
Drill Doctor 19mm Chuck To Suit DD500X & DD750X
Drill Doctor Industrial 2.5-19mm Drill Bit Cap.
Diamond Wheel 180gm to Suit DDXP, 500X & 750X Drill Doctor
Teng 10pc 4.5mm Drill Bit (DIN338)
Holemaker Pilot Pin 6.34mmx127mm (19-32mm / 75mm DOC)
Holemaker Silver Series Annular Cutter 36mmx50mm DOC
Holemaker Cutting Fluid 1 Litre
Pilot Pin 8mm To Suit 50mm Long TCT Cutters
A116 Mitsuba A/13 Classical V-Belt
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
Teng 8pc TX Set With Ball Point End (Folding)
Groz HD Lever Action Grease Gun 400gm (10000PSI)
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
Champion 8G x 1in S/Tapping Screw -Rsd -Ph -316/A4 -30pk
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
Teng 7pc Standard Torx Key Set-Tx10-Tx40
Champion 3/16in UNF Nylon insert Self-Locking Nut -20pk
1/2in Long Ratchet Flexible Head 45 Teeth 400mm
Champion 1/8in x 3/4in Roll Pin -20pk 