Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE HONDA ROCKET RED 400ML
$26.20 incl. GST
In stock
Related products
FUEL TANK PROTECTION
$72.95 incl. GST
PAINT & COATINGS
$129.95 incl. GST



Champion Retainer Spring To Suit 17/32in Shaft -50pk
COLORPAK PRO SERIES AEROSOL ACRYLIC GLOSS BLACK
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
Champion Retainer Spring To Suit 11/64in Shaft -50pk
Champion Red Wire Tap Connector -6pk
Champion E-Clip Suit 3/32 Shaft -50pk
ITM Push Girder Trolley-1 Ton-64-203mm Beam Width
FITTING KIT SUZUKI GRAND VITARA , ESCUDO 2005 - 2019 DOUBLE DIN (BLACK)
THB Inline Coupler 2 Way Single Action
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
Groz 3/8in BSP F-R-L Unit 63CFM / 1800LPM
Champion E-Clip Suit 1/8 Shaft -50pk
Groz 3/8in BSP F-R Unit 77CFM / 2200LPM
ITM Air Hose 10mm (3/8in) x 15M Hybrid Polymer w/ Fittings
Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
COLORPAK COLOURSTEEL AEROSOL SPRAYPAINT GREYFRIARS
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
FORMULA GRAVITY AIRBRUSH SINGLE ACTION 0.3MM
Champion Retainer Spring To Suit 19/64in Shaft -50pk
Champion M8 x 8mm Socket Grub Screw -10pk
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk 