Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI BLUE 400ML
$26.20 incl. GST
In stock
Related products
FUEL TANK PROTECTION
$349.95 incl. GST



Champion 1/8in x 5/8in Roll Pin -20pk
Champion E-Clip Suit 3/32 Shaft -50pk
Champion Retainer Spring To Suit 7/32in Shaft -50pk
KBS RUSTSEAL RUST PREVENTIVE COATING SILVER 1 LITRE
Champion E-Clip Suit 1/2 Shaft -50pk
Champion E-Clip Suit 1/8 Shaft -50pk
Champion 1/8in x 3/4in Roll Pin -20pk
Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
Champion E-Clip Suit 7/16 Shaft -30pk
Champion M8 x 8mm Socket Grub Screw -10pk
Champion M4 x 20mm Stainless Set Screw 304/A2 -15pk 