-
×
Champion 3/16in x 1-1/2in Roll Pin -12pk
1 × $27.41 -
×
ITM Lever Hoist-Heavy Duty-3 Ton-1.5 Meter Lift
1 × $695.10 -
×
Holemaker Carbide Burr 5/8x1-5/16inx1/4in Tapered Radius AC
1 × $108.47 -
×
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
1 × $431.03 -
×
Holemaker Cutting Fluid 20 Litre
1 × $453.92 -
×
Holemaker Carbide Burr 1/4x1/4x1/4in Inverted Cone Shape DC
1 × $25.10 -
×
Holemaker Carbide Burr 3/8x1-1/16inx1/4in Tapered Radius AC
1 × $44.21 -
×
Teng 7pc Standard Torx Key Set-Tx10-Tx40
1 × $36.44 -
×
Holemaker Carbide Burr 3/8 x 3/4in Cylindrical Square End DC
1 × $42.11 -
×
Teng 9pc Standard Metric Hex Key Set - 1.5- 10.0mm
1 × $27.41 -
×
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
1 × $27.83 -
×
ITM Chain Block-Heavy Duty-3 Ton-3 Meter Lift
1 × $628.01 -
×
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
1 × $34.97 -
×
ITM Push Girder Trolley-1 Ton-64-203mm Beam Width
1 × $299.99 -
×
ITM Push Girder Trolley-5 Ton-114-305mm Beam Width
1 × $899.22 -
×
Champion 1/2in x 7/8in x 1/16in Aluminium Washer - 100pk
1 × $84.42 -
×
Holemaker Carbide Burr 5/16 x 3/4in Flame Shape DC
1 × $30.56 -
×
Teng Digital Torque Wrench 20 - 200Nm
1 × $1,233.54
Holemaker Carbide Burr 3/8×1/4in Ball Shape DC -6in(L) Shank
$39.17 incl. GST
In stock
CB-SD3L6 | Holemaker Carbide Burr 3/8×1/4in Ball Shape DC -6in(L) Shank Extended 6 Shank. Double cut geometry for cutting ferrous metals. Premium industrial quality carbide burrs. Head Diameter: 3/8 Flute Length: – Overall Length: 6-1/4 Shank Diameter: 1/4
Related products
