-
×
Holemaker Cutting Fluid 1 Litre
1 × $40.53 -
×
Teng 7pc Standard Torx Key Set-Tx10-Tx40
1 × $36.44 -
×
HEATSHIELD THERMAFLECT SLEEVE 1-1/4" X 10' HOOK & LOOP SEAM
1 × $424.95 -
×
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
1 × $203.28 -
×
Champion 1/4in Univ. Air Line 2-Way Manifold Block Female
1 × $23.10 -
×
Holemaker Silver Series Annular Cutter 48mmx50mm DOC
1 × $245.81
-
×
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
1 × $17.54 -
×
Teng 1/2in Dr. 17in / 425mm Power Bar
1 × $94.50 -
×
Tactix Pliers Heavy Duty Diagonal 7.5in/190mm
1 × $25.41 -
×
Teng 8pc TX Set With Ball Point End (Folding)
1 × $70.67 -
×
Ehoma Pivot Handle Clamp 400mm x 175mm 700kgp
1 × $221.13 -
×
ITM Inverter Generator Petrol 3300W Peak Recoil Start
1 × $3,068.10
-
×
Teng Safety Lanyard Wire 4.5kg / 860-1450mm
1 × $43.89 -
×
HAIDA CLASSIC ROUND SLIM C-POL FILTER 49MM
1 × $39.95
-
×
Teng 11pc Retractable Bike Kit
1 × $77.39 -
×
Holemaker Silver Series Annular Cutter 48mmx25mm DOC
1 × $193.62
-
×
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
1 × $23.21 -
×
NITECORE INTELLIGENT 12V CAR CHARGER COMPATIBLE WITH I2/I4/D2/D4 AND ANY OTHER SAME SIZE CONNECTION
1 × $3.95 -
×
Teng 10pc 4.0mm Drill Bit (DIN338)
1 × $31.50
Holemaker Silver Series Annular Cutters 3/4 x 2in
$81.80 incl. GST
Only 1 left in stock
HM3/4X2 | Holemaker Silver Series Annular Cutters 3/4 x 2in Made In The USA. M2 High Speed Steel Material. Multi-Cut Stack Geometry. Fully Ground With Internal Relief. Diameter: 3/4 Depth of Cut: 2 6.35mm Pilot Pin To Suit Part# SP16004 (Not Included)
Related products
