Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI BLUE 400ML
$26.20 incl. GST
In stock
Related products
$157.99 incl. GST
$449.95 incl. GST
$49.95 incl. GST
$60.95 incl. GST



Ehoma General Duty Clamp 800mm x 175mm 1000kgp
NITECORE MH12PRO 3300 LUMEN USB-C RECHARGEABLE TACTICAL FLASHLIGHT 505 YARDS THROW
A118 Mitsuba A/13 Classical V-Belt
TacklePro Kabura Lure 80gm - Pink Panther
Ehoma General Duty C-Clamp 150mm x 75mm 1000kgp
Groz 1/4in BSP F-R Unit 20CFM / 550LPM
Ehoma General Duty Clamp 800mm x 120mm 1000kgp
KBS ENGINE ENAMEL MOTORCOATER ALUMINIUM 500ML
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
Teng Digital Torque Wrench 20 - 200Nm
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
HEATSHIELD THERMAFLECT SLEEVE 2-1/2" X 1M
Champion Tyre Inflator 0 -150 Psi / 0 -1050Kpa (Dual Chuck)
DYNAMAT DYNADECK ULTRA-DURABLE CARPET REPLACEMENT 1.82M(6FT) (0.91M x 1.37M) 1 SHEET
Holemaker Cutting Fluid 1 Litre
Teng 8pc TX Set With Ball Point End (Folding)
Pilot Pin 8mm To Suit 75mm Long TCT Cutters 



