Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI RMZ YELLOW 400ML
$26.20 incl. GST
Only 2 left in stock
Related products
$399.95 incl. GST
$179.95 incl. GST
$379.95 incl. GST



Diamond Wheel 180gm to Suit DDXP, 500X & 750X Drill Doctor
Tactix Pliers Heavy Duty Diagonal 7.5in/190mm
Teng Adjustable Brake Cylinder Hone 20-68mm
Champion E-Clip Suit 7/16 Shaft -30pk
Teng 1/2in Dr. 10in Wobble Extension Bar
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
Teng 4pc 1/2in Dr. Torx Bit Set-Tx45-Tx55
A118 Mitsuba A/13 Classical V-Belt
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
Champion E-Clip Suit 1/8 Shaft -50pk
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
ITM Chain Block-Heavy Duty-1 Ton-6 Meter Lift
Teng 10pc 4.0mm Drill Bit (DIN338)
Teng 1/2in Dr. 17in / 425mm Power Bar
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
VIOFO DASHCAM 2K A119 V3 FRONT DVR WITH GPS DVR
Groz Dp6 Degree Protractor
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
Teng 10pc 4.5mm Drill Bit (DIN338)
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
Teng Digital Torque Wrench 20 - 200Nm
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
BLUETTI 12V/24V LEAD ACID BATTERY CHARGING CABLE FOR AC300/EP500P 





