KBS ENGINE ENAMEL MOTORCOATER VELVET BLACK 400G AEROSOL

MotorCoater Aerosol is easy to apply, offers superb coverage and produces a professional finish. MotorCoater can be applied directly to clean, dry and rust-free metal, over a suitable primer or over well-prepared existing coatings. MotorCoater has high heat resistance (up to 240°C), excellent durability and provides deep, richly pigmented colours with high gloss level – the perfect choice for engine restoration projects.

FEATURES
Approximately 2-4m2 coverage per aerosol
High performance
Extremely high gloss (metallic and satin finishes excepted)
Perfect for brake calipers too!
High quality epoxy reinforced enamel
Self levelling
Withstands temperatures up to 240°C
Matches OEM standard colours
Will not blister, flake, crack or peel
Oil, transmission fluid & petrol resistant
For best spray performance, gently heat the can to 20-25°C in a warm water prior to use.

SURFACE PREPARATION
Ensure surfaces are clean, dry and free of rust and loose paint. Lightly sand smooth and glossy surfaces or use a primer to maximise adhesion.

APPLICATION
The ideal spray can temperature for ensuring optimal propellant-paint mixture for spraying is between around 20 and 25°C. Gently heat the can in warm water prior to spraying if necessary. Shake can vigorously for at least 1 minute after the mixing ball begins to rattle. Hold can approximately 15-20cm from surface to be sprayed and apply two or more light coats a few minutes apart.

Recoat within 1 hour or after 24 hours. Full cure after 7 days.

After use invert can and spray for several seconds to clean valve.

Theoretical coverage up to 4m2 at 25 micron dry film thickness. Recommended dft 37-50 micron