Clear colourless volatile liquid with a strong sharp odour. MEK has good solvency & dissolves many substances making it a desired solvent in processes involving: gums, synthetic resins, cellulose acetate, nitrocellulose coatings, vinyl films and many rubbers. Commonly used as a Paint Thinner & High quality Gun Wash.
Methyl Ethyl Ketone (MEK) Common Uses
Surface Coatings: Because Methyl Ethyl Ketone has excellent solvency properties it is widely employed in the manufacture of paints, lacquers, varnishes and thinners. MEK is particularly effective in lacquer formulations of high solid content and low viscosity and in the manufacture of coatings which require a solvent with a relatively fast evaporation rate.
Cleaning and Degreasing Solvent: Methyl Ethyl Ketone is an excellent cleaning agent, capable of removing almost all oil fat or grease stains.
Adhesives: Methyl Ethyl Ketone is frequently used as a solvent in the blending and compounding of adhesives. It is also used in the manufacture of synthetic cements.
METHYL ETHYL KETONE (MEK) 4L
$39.95 incl. GST
In stock
Related products
$449.95 incl. GST
$167.95 incl. GST
$399.95 incl. GST
$249.95 incl. GST
$379.95 incl. GST



Tactix Tin Snip 250mm (10in) Right Cut
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
Teng 8pc TX Set With Ball Point End (Folding)
Holemaker Cutting Fluid 500ml
Teng 11pc Retractable Bike Kit
1/2in Long Ratchet Flexible Head 45 Teeth 400mm
Groz Spring Divider 250mm
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
Groz Precision Engineers Square - 100 x 75mm (BS939)
Teng Mini Bits 72T Ratchet w/ 8mm Ring Spanner
FORMULA COMPRESSOR 2.5HP DIRECT DRIVE 8.2CFM / 232LPM 40L
Drill Doctor 19mm Chuck To Suit DD500X & DD750X
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
Drill Doctor Industrial 2.5-19mm Drill Bit Cap.
Holemaker Uni Shank Tinite (Tin) Cutter 26mmx25mm
Holemaker Uni Shank Tinite (Tin) Cutter 41mmx50mm
Teng 1/2in Dr. 24in / 600mm Power Bar
Teng 10pc 5.0mm Drill Bit (DIN338)
Teng 10pc 4.0mm Drill Bit (DIN338)
Groz Bcord100 Brass Caliper
Teng 10pc 4.5mm Drill Bit (DIN338)
Diamond Wheel 180gm to Suit DDXP, 500X & 750X Drill Doctor
Teng 1/4in Dr. Palm Ratchet 45T
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
Pilot Pin 8mm To Suit 75mm Long TCT Cutters
Holemaker Pilot Pin 6.34mmx102mm (15-52mm / 50mm DOC)
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
Teng 9pc Long Arm TX Key Set - TX8-TX40
Holemaker Uni Shank Tinite (Tin) Cutter 28mmx50mm
Holemaker Pilot Pin 6.34mmx127mm (19-32mm / 75mm DOC)
Holemaker Uni Shank Tinite (Tin) Cutter 43mmx50mm 




