Size: 13mmWidth x 9mmDepth x 665mmLength
PRODUCT DESCRIPTION:
The MITSUBA classical RE belt type with mould cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The mould cog provides high flexibility and a good fit in the pulley grooves as well as lower operating temperature, which increase belts life.
APPLICATION:
The MITSUBA classical RE belt has a wide range of applications with high belt speeds and small pulley diameters. The belt allows immediate improvement of existing drives which use wrapped bets, providing overall benefits with regards to economy as well as power transmission and reliability of operation.



Champion AF 7.5Amp Standard Blade Fuse (Brown) -10pk
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
ProEquip Auto Darkening Welding Filter - DIN11
Champion M12 x 45mm Stainless Set Screw W/Nut 304/A2 -2pk
Champion Male Push-On 2-Way Connector -10pk
A164 Mitsuba A/13 Classical V-Belt
Champion 1/4in BSF Straight Grease Nipple -8pk
Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
Champion 6G x 3/4in S/Tapping Screw -Rsd -Ph -316/A4 -25pk
Teng 12in Power Grip Plier Curved Jaw
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb L/R
Champion M10 x 50mm Stainless Set Screw 304/A2 -3pk
Champion M8 x 20mm Stainless Set Screw 304/A2 -8pk
Champion Blue Wire Tap Connector -6pk
Champion E-Clip Suit 5/16 Shaft -50pk
Champion M8 x 40mm Stainless Set Screw 304/A2 -8pk
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
Champion M14 x 24mm x 2.5mm Aluminium Washer - 50pk
15A1315 Mitsuba Automotive V-Belt, 15Avx, Avx15
Champion 4G x 1in S/Tapping Screw -Rsd -Ph -316/A4 -30pk
Champion Retainer Spring To Suit 7/32in Shaft -50pk
Champion Retainer Spring To Suit 19/64in Shaft -50pk
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
Champion Blue Male Push-On Spade Terminal -14pk 