PRODUCT DESCRIPTION
The MITSUBA classical RE Cog belt is engineered with specially formulated compound to give excellent sidewall wear resistance and bending stress resistance. The belts achieve most high speed and high torque drives with consid- erable ease and having excellent oil and heat resistance as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increase belt life.
APPLICATION
The MITSUBA classical RE Cog belt has a wide range of applications, especially in industrial drives with high belt speeds and small belt pulley diameters. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and redial.



Champion M5 x 25mm Machine Screw -Csk -Ph -316/A4 -25pk
COLBOR PL8-R RGB LED POCKET LIGHT
AXXESS MITSUBISHI BACK UP CAMERA RETAIN OR ADD ON 14 ON
A140 Mitsuba A/13 Classical V-Belt
Teng 1/4in Dr. Ratchet Handle 72T
SPEAKER SPACER 6.5" 36MM BLACK CARPET (PAIR)
AMPLIFIED HARNESS NISSAN SKYLINE, 350Z 95 - 10 BOSE
Holemaker Jobber Drill 23/64in (5pk)
Pilot Pin 8mm To Suit 50mm Long TCT Cutters
Teng 10pc 5.0mm Drill Bit (DIN338)
Holemaker Pilot Pin 6.34mmx127mm (19-32mm / 75mm DOC)
Holemaker Jobber Drill 3.5mm (10pk)
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
HEATSHIELD LAVA TURBO COVER FOR TURBOCHARGER T6
Champion Tyre Inflator 0 -150 Psi / 0 -1050Kpa (Dual Chuck)
Champion Battery Hydrometer
HEATSHIELD LAVA TURBO COVER FOR TURBOCHARGER T3
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
Champion 32mm (I.D.) x 3.5mm Metric O-Ring -10pk
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
Holemaker Jobber Drill 19/64in (10pk)
Holemaker Jobber Drill 15/64in (10pk) 