-
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 13mm
1 × $69.93 -
×
Champion S/Tapping Screws - Mushroom Head - 4.2 x 13mm
1 × $23.84 -
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $49.25 -
×
Champion 3/8in UNC Nylon insert Self-Locking Nut -8pk
1 × $16.70 -
×
A138 Mitsuba A/13 Classical V-Belt
1 × $51.97 -
×
A120 Mitsuba A/13 Classical V-Belt
2 × $45.20
-
×
Champion S/Tapping Screws - Mushroom Head - 5.5 x 25mm
1 × $23.84 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $43.69
-
×
Champion S/Tapping Screws - Mushroom Head - 4.8 x 13mm
1 × $88.52 -
×
Ehoma Quick Action Lever Clamp 200mm x 100mm 350kgp
1 × $162.96 -
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $20.58 -
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
1 × $114.66 -
×
Teng 1/2in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $147.21
-
×
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
1 × $203.18 -
×
Ehoma H.D. Clamp 500mmx140mm 1200kgp (Changeable Pads)
1 × $288.75 -
×
THB 40SH - 1/2in Socket Hose Coupler
1 × $17.64 -
×
Teng 1/4in Dr. Ratchet Handle 72T
2 × $116.97 -
×
A105 Mitsuba A/13 Classical V-Belt
1 × $39.54
-
×
A107 Mitsuba A/13 Classical V-Belt
1 × $40.30
-
×
Teng Air Blow Gun 270mm
1 × $25.73 -
×
Teng 9pc Ball-End AF Hex Key Set - 5/64-3/8in
1 × $50.72 -
×
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
1 × $23.42 -
×
Ehoma General Duty Clamp 200mm x 100mm 450kgp
1 × $84.74 -
×
Champion 3/8in Hose Barb Air -Line Coupling Nitto
1 × $35.18 -
×
Teng 1/4in Dr. FRP Ratchet 45T DIN3122D
1 × $82.64 -
×
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
1 × $139.13 -
×
Champion Retainer Spring To Suit 17/32in Shaft -50pk
1 × $28.67 -
×
Groz 1/4in BSP Oil Mist Lubricator 48CFM / 1350LPM
1 × $61.22 -
×
FORMULA GRAVITY AIRBRUSH SINGLE ACTION 0.3MM
1 × $54.95 -
×
A100 Mitsuba A/13 Classical V-Belt
1 × $37.66
-
×
A119 Mitsuba A/13 Classical V-Belt
1 × $44.80
-
×
AUTOVIEW REVERSE PARKING SENSOR 4 x REAR RUBBER SENSORS
1 × $109.95 -
×
A115 Mitsuba A/13 Classical V-Belt
1 × $43.30
SPAX1307 Mitsuba Wedge Cogged V-Belt
$39.89
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products