-
×
A130 Mitsuba A/13 Classical V-Belt
1 × $38.31 -
×
A124 Mitsuba A/13 Classical V-Belt
3 × $36.54
-
×
Teng Open Ended Insert Spanner 14 x 18mm 38mm
1 × $68.46 -
×
Teng 9pc Long Arm Ball-End TX Key Set - TX8-TX40
1 × $83.90 -
×
SANTINT M12 PROXIMITY SWITCH (CONTRINEX)
1 × $75.00 -
×
Champion Retainer Spring To Suit 19/64in Shaft -50pk
1 × $24.68 -
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $19.64 -
×
Champion Retainer Spring To Suit 17/32in Shaft -50pk
1 × $27.41 -
×
FITTING KIT JEEP GRAND CHEROKEE / DODGE DURANGO 2011 - 2013 DOUBLE DIN (SIDE TRIMS) (BLACK)
1 × $49.95 -
×
Teng Mini Bits 72T Ratchet w/ 8mm Ring Spanner
1 × $65.52 -
×
A156 Mitsuba A/13 Classical V-Belt
1 × $45.98
-
×
Teng 12in Power Grip Plier Jaw
1 × $68.99 -
×
A100 Mitsuba A/13 Classical V-Belt
1 × $29.48
-
×
Champion 3/16in UNF Nylon insert Self-Locking Nut -20pk
1 × $15.33 -
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
2 × $109.31 -
×
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
1 × $128.31 -
×
Champion 1/2in x 7/8in x 3/32in Aluminium Washer - 25pk
1 × $193.41 -
×
A118 Mitsuba A/13 Classical V-Belt
2 × $34.78
-
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
2 × $96.29 -
×
Champion 1/8in x 5/8in Roll Pin -20pk
1 × $14.18 -
×
Ehoma Quick Action Lever Clamp 300mm x 140mm 500kgp
1 × $226.80 -
×
Champion E-Clip Suit 3/8 Shaft -100pk
1 × $55.02 -
×
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
2 × $34.97 -
×
Drill Doctor Industrial 2.5-19mm Drill Bit Cap.
1 × $860.06 -
×
FITTING KIT HYUNDAI ELANTRA 2013 - 2015 DOUBLE DIN (BLACK)
1 × $69.95 -
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $49.25 -
×
Champion M24 x 34mm x 2.5mm Aluminium Washer - 25pk
2 × $170.42 -
×
A109 Mitsuba A/13 Classical V-Belt
1 × $32.12
-
×
Groz 1/2in BSP F-R-L Unit 99CFM / 2800LPM
1 × $400.79 -
×
Ehoma General Duty Clamp 100mm x 50mm 220kgp
1 × $45.26 -
×
ISL 400 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $54.08 -
×
Teng Air Blow Gun 270mm
1 × $25.73 -
×
Champion Retainer Spring To Suit 7/32in Shaft -50pk
1 × $23.73 -
×
FITTING KIT CHRYSLER / JEEP / DODGE 2007 ON DOUBLE DIN (SIDE TRIMS) (BLACK)
1 × $54.95 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
2 × $20.90 -
×
Holemaker Sheet Metal Cutter Set 13 Piece 8-20mm
1 × $360.78 -
×
HARNESS TOYOTA LEXUS SWC ADD ON WITH AUX-IN
1 × $17.95 -
×
ProEquip 250kg Transmission Cradle
1 × $132.51 -
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $36.12 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $34.19
-
×
A134 Mitsuba A/13 Classical V-Belt
1 × $39.49
SPAX1625 Mitsuba Wedge Cogged V-Belt
$38.82
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products