-
×
Champion 5/16in UNF Nylon insert Self-Locking Nut -10pk
1 × $14.81 -
×
Teng 1/2in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $147.21 -
×
KBS ERADICATE RUST SMALL MACHINES REPAIR KIT SATIN BLACK
1 × $79.95
-
×
FITTING KIT HYUNDAI ELANTRA GT 2013 ON DOUBLE DIN (WITHOUT NAV) (HIGH GLOSS BLACK)
1 × $69.95
-
×
AMPLIFIED HARNESS EURO AMP LAND ROVER MERCEDES CHRYSLER
1 × $39.95
-
×
Drill Doctor Industrial 2.5-19mm Drill Bit Cap.
1 × $860.06 -
×
COLORPAK BULK FILLING MACHINE F130 O-RING
1 × $79.95
-
×
HAIDA SNAP-ON LENS CAP 37MM
1 × $9.95
-
×
Champion E-Clip Suit 3/32 Shaft -50pk
1 × $13.86 -
×
Champion Retainer Spring To Suit 11/64in Shaft -50pk
1 × $20.90 -
×
FITTING KIT MAZDA 6 , CX5 2012 - 2016 DOUBLE DIN (BLACK)
1 × $65.95
-
×
A102 Mitsuba A/13 Classical V-Belt
1 × $30.06
-
×
Teng 9pc Standard Metric Hex Key Set - 1.5- 10.0mm
1 × $27.41 -
×
ISL 300 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $32.24 -
×
Champion Blue Cable Connector -10pk
1 × $14.81 -
×
HEATSHIELD COOL FOIL TAPE 50MM X 3 METERS
1 × $59.95
-
×
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
1 × $59.75 -
×
FITTING KIT HYUNDAI SANTA FE 2007 - 2012 DOUBLE DIN (SILVER)
1 × $59.95
-
×
Teng Plastic Magnetic Tray 150mm (Round)
1 × $50.19 -
×
Champion E-Clip Suit 5/16 Shaft -50pk
1 × $20.37 -
×
KBS FUEL TANK SEALER KIT CAR UTE VAN UP TO 100L TANK
1 × $199.95
-
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $96.29 -
×
Teng 10pc 4.0mm Drill Bit (DIN338)
1 × $31.50 -
×
Champion Retainer Spring To Suit 19/64in Shaft -50pk
1 × $24.68 -
×
A156 Mitsuba A/13 Classical V-Belt
1 × $45.98
-
×
ISL 450 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $52.50 -
×
Champion Retainer Spring To Suit 17/32in Shaft -50pk
1 × $27.41 -
×
FORMULA AIRBRUSH KIT DINO FOR KIDS WATERCOLOUR PENS AND STENCILS AA BATTERY
1 × $59.95 -
×
Ehoma Pivot Handle Clamp 200mm x 100mm 450kgp
1 × $118.86 -
×
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
1 × $128.31 -
×
Teng 10pc 4.2mm Drill Bit (Din338)
1 × $39.90 -
×
Champion 1/8in x 3/4in Roll Pin -20pk
1 × $14.81 -
×
FITTING KIT CHEVY COLORADO / GMC CANYON 2015 ON (BLACK)
1 × $99.95
-
×
ITM 240V Electric Hoist-500kg-3 Meter Lift
1 × $4,335.66 -
×
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
1 × $110.46
-
×
FITTING KIT HYUNDAI ELANTRA 2013 - 2015 DOUBLE DIN (BLACK)
1 × $69.95
-
×
A103 Mitsuba A/13 Classical V-Belt
1 × $30.36
-
×
ITM Lever Hoist-Heavy Duty-9 Ton-1.5 Meter Lift
1 × $1,635.27 -
×
ITM 240V Electric Hoist-2 Ton-3 Meter Lift
1 × $5,409.71 -
×
Champion E-Clip Suit 5/32 Shaft -50pk
1 × $17.85 -
×
Champion E-Clip Suit 1/2 Shaft -50pk
1 × $46.10 -
×
AMPLIFIED AUDI A2 / A3 / A4 / S3 / TT 1999 -2014
1 × $59.95 -
×
A125 Mitsuba A/13 Classical V-Belt
1 × $36.84
-
×
Ehoma Extra H.D. Clamp 500x175mm 2200kgp Changebl Pads
1 × $454.23 -
×
A100 Mitsuba A/13 Classical V-Belt
1 × $29.48
SPAX1800 Mitsuba Wedge Cogged V-Belt
$43.00
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products