-
×
Teng 10pc 4.0mm Drill Bit (DIN338)
1 × $31.50 -
×
AUTOMOTIVE BATTERY AGM 12V 12AH 780CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
1 × $449.95 -
×
A119 Mitsuba A/13 Classical V-Belt
1 × $35.06 -
×
A105 Mitsuba A/13 Classical V-Belt
1 × $30.94
-
×
Champion E-Clip Suit 5/32 Shaft -50pk
1 × $17.85 -
×
A156 Mitsuba A/13 Classical V-Belt
1 × $45.98
-
×
ITM Geared Girder Trolley-5 Ton-100-305mm Beam Width
1 × $980.07 -
×
Champion E-Clip Suit 3/32 Shaft -50pk
1 × $13.86 -
×
ITM Chain Block-Heavy Duty-5 Ton-6 Meter Lift
1 × $1,177.47 -
×
A114 Mitsuba A/13 Classical V-Belt
2 × $33.60
-
×
ISL 200 x 4.8mm Nylon Releasable Cable Tie - Nat - 100pk
1 × $16.91 -
×
Ehoma Pivot Handle Clamp 400mm x 175mm 700kgp
1 × $221.13 -
×
ITM 240V Electric Hoist-3 Ton-3 Meter Lift
1 × $7,406.49 -
×
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
2 × $109.31 -
×
Champion M22 x 32mm x 2.5mm Aluminium Washer - 25pk
1 × $134.40 -
×
FITTING KIT GM MUILT KIT 2006 ON DOUBLE DIN (BLACK)
2 × $49.95 -
×
Champion E-Clip Suit 7/16 Shaft -30pk
1 × $36.12 -
×
Champion 8G x 25mm Mushroom Head S/Drilling Screw Ph -50pk
1 × $21.00 -
×
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
1 × $16.70 -
×
A102 Mitsuba A/13 Classical V-Belt
3 × $30.06
-
×
Teng 10pc 4.2mm Drill Bit (Din338)
1 × $39.90 -
×
ProEquip 750mm Industrial/Commercial Pedestal Fan
1 × $512.51 -
×
Ehoma General Duty C-Clamp 200mm x 100mm 1000kgp
1 × $199.50 -
×
FITTING KIT MITSUBISHI 2007 - 2019 DOUBLE DIN (WITH MMCS RADIO) (CHARCOAL HIGH GLOSS)
1 × $89.95 -
×
ISL 200 x 7.5mm Nylon Releasable Cable Tie - Nat - 100pk
1 × $38.43 -
×
A158 Mitsuba A/13 Classical V-Belt
1 × $46.56
-
×
FITTING KIT NISSAN SENTRA 2020 - UP DOUBLE DIN (GLOSS BLACK / SILVER TRIM)
1 × $65.95 -
×
ITM Lever Hoist-Heavy Duty-9 Ton-1.5 Meter Lift
1 × $1,635.27 -
×
ProEquip Universal Welding Cart
1 × $212.21 -
×
A116 Mitsuba A/13 Classical V-Belt
1 × $34.19
-
×
A107 Mitsuba A/13 Classical V-Belt
1 × $31.54
-
×
Teng 7pc Standard Torx Key Set-Tx10-Tx40
1 × $36.44 -
×
Ehoma Pivot Handle Clamp 300mm x 140mm 670kgp
1 × $172.20 -
×
Champion E-Clip Suit 1/8 Shaft -50pk
1 × $14.49 -
×
ITM Geared Girder Trolley-3 Ton-88-203mm Beam Width
1 × $718.20 -
×
Champion Retainer Spring To Suit 19/64in Shaft -50pk
1 × $24.68 -
×
ITM Lever Hoist-Heavy Duty-3 Ton-1.5 Meter Lift
1 × $695.10 -
×
Champion E-Clip Suit 5/16 Shaft -50pk
1 × $20.37 -
×
Champion M20 x 30mm x 2.5mm Aluminium Washer - 50pk
1 × $128.31 -
×
ProMarine 12V Non-Automatic Sump/Bilge Pump - 1100gmph
1 × $54.50 -
×
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
1 × $19.64 -
×
A125 Mitsuba A/13 Classical V-Belt
1 × $36.84
SPBX1700 Mitsuba Wedge Cogged V-Belt
$58.02
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products