-
×
A130 Mitsuba A/13 Classical V-Belt
1 × $38.31 -
×
Groz Outside Caliper 250mm
1 × $56.70 -
×
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
1 × $139.13 -
×
Teng 6in C-Clamp Locking Plier (NP) w/Swivel Pad
1 × $58.17 -
×
Teng Digital Torque Wrench 20 - 200Nm
1 × $1,233.54 -
×
AUTOVIEW CANBUS ADAPTER UNIVERSAL SLIM KEY
1 × $129.95 -
×
Champion E-Clip Suit 3/32 Shaft -50pk
1 × $13.86 -
×
Groz 125ml/4oz Oil Can (Brass Pump) W/ Flex Spout
1 × $20.58 -
×
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
1 × $49.25 -
×
FITTING KIT CHRYSLER / JEEP / DODGE 2007 ON DOUBLE DIN (SIDE TRIMS) (BLACK)
1 × $54.95 -
×
Champion 1/8in x 5/8in Roll Pin -20pk
1 × $14.18 -
×
1/2in Long Ratchet Flexible Head 45 Teeth 400mm
1 × $124.85 -
×
A158 Mitsuba A/13 Classical V-Belt
1 × $46.56
-
×
A103 Mitsuba A/13 Classical V-Belt
1 × $30.36
-
×
HEATSHIELD LAVA TURBO COVER FOR TURBOCHARGER T6
1 × $769.95 -
×
A109 Mitsuba A/13 Classical V-Belt
1 × $32.12
-
×
Tactix Pliers Mini 4pc Set
1 × $36.12 -
×
Teng 10pc 4.2mm Drill Bit (Din338)
1 × $39.90 -
×
ISL 500 x 4.6mm 316 Stainless Cable Tie - 20pk
1 × $64.79 -
×
DYNAMAT DYNADECK ULTRA-DURABLE CARPET REPLACEMENT 0.9M(3FT)(0.91M x 1.37M) 1 SHEET
1 × $349.95 -
×
Teng 9pc Long Arm TX Key Set - TX8-TX40
1 × $60.90 -
×
UNIVERSAL ANTENNA ADAPTER 2 X MALE TO 1 X FEMALE SOCKET
1 × $19.95 -
×
FM AUX TRANSMITTER WITH 3.5MM PLUG ADAPTER
1 × $69.95 -
×
A106 Mitsuba A/13 Classical V-Belt
1 × $31.23
-
×
Ehoma Pivot Handle Clamp 400mm x 175mm 700kgp
1 × $221.13 -
×
Groz 14pc Punch And Chisel Set
1 × $227.43 -
×
DYNAMAT DYNACORE 1/2 HALF INCH 32" x 54" 1 SHEET
1 × $199.95 -
×
FITTING KIT HONDA ACCORD 2003 - 2007 DOUBLE DIN (LOWER DASH KIT) (BLACK)
1 × $84.95 -
×
A144 Mitsuba A/13 Classical V-Belt
1 × $42.44
-
×
A107 Mitsuba A/13 Classical V-Belt
1 × $31.54
-
×
Tactix Pliers Locking 7in/175mm
1 × $26.78 -
×
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
1 × $96.29 -
×
AMPLIFIED HARNESS FORD 2003 - 2012 AMP INTEGRATION PLUG FOR SUBS
1 × $51.58 -
×
A108 Mitsuba A/13 Classical V-Belt
1 × $31.82
SPBX2020 Mitsuba Wedge Cogged V-Belt
$68.94
In stock
PRODUCT DESCRIPTION
The MITSUBA metric wedge cog belt is a temperature and oil resistant as well as antistatic. The mould cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature, which increases belt life.
APPLICATION
The MITSUBA metric wedge cog belt has a wide range of applications, especially in industrial drives with high belt speeds and high torque. This belt allows immediate improvement of existing drives which use wrapped belt, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
Related products