Description
Note: Batteries not included.
The NITECORE LA10 CRI LED Flashlight is the ideal storm/emergency preparedness or camping companion. Running on a single easy-to-find AA battery, it has three primary outputs from a low of 9 lumens to a high of 85, plus an emergency location beacon that flashes at regular intervals to show its location while conserving battery power. This simple-to-use tool has a retractable diffuser to throw smooth and soft light in a full 360° circle to illuminate tables, tents, or small rooms. This iteration of the LA10 utilises a Nichia 219B LED that produces light with a CRI of 90. This translates to a beam colour that closely resembles natural daylight.
Built for convenience and portability, the LA10 CRI is just over 3″ long and weighs only 1.5 ounces without the battery so it can fit in a draw, pack or pocket easily. Its housing is made of a lightweight and durable aluminium alloy, with a scratch and corrosion-resistant anodised finish. A built-in magnet in the tailcap allows it to be easily attached to many metallic surfaces and the flat cap design enables it to stand on flat surfaces and act like a flameless candle.
Key Features:
One Nichia 219B LED.
Built-in diffuser extends to provide 360° of smooth and soft illumination for lighting tables, tents, or small rooms.
Location beacon: Flashes light once at a regular interval to mark the location while optimising battery life.
Built-in magnet on base to adhere to metal surfaces such as car hoods.
Lightweight and durable aluminium alloy housing.
Scratch and corrosion-resistant anodised finish.
IPX6-rated to be highly water-resistant.
Impact-resistant to 5′ (1.5m).
Lightweight: 1.5-ounces without battery.
Runs on one user-supplied AA disposable or rechargeable battery.
Digitally-regulated output ensures consistent beam intensity throughout the life of the battery.
Reverse polarity protection prevents damage to light if the battery is installed incorrectly.
Specifications
Illumination Source 1 x Nichia 219B LED
Output Range Low: 9 lumens
Moed: 30 lumens
High: 85 lumens
Runtime Low: 23.0 h
Moed: 6.0 h
High: 1.5 h
Construction Aluminium alloy
Waterproofing IPX6-rated, water-resistant
Impact Resistance 4.9′ / 1.5 m
Dimensions 3.1 x 0.9″ / 7.9 x 2.3 cm
Weight 1.5 oz / 42.7 g, without battery
NITECORE LA10 CRI LED FLASHLIGHT
$52.95 incl. GST
Only 2 left in stock
Related products
BATTERY CHARGERS & JUMP START
NITECORE INTELLIGENT 12V CAR CHARGER COMPATIBLE WITH I2/I4/D2/D4 AND ANY OTHER SAME SIZE CONNECTION
$3.95 incl. GST



ITM Chain Block-Heavy Duty-3 Ton-6 Meter Lift
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
Groz K3-4Cl Hss Knurl 3/4in (D) x 1/4in (W) x 1/4in Hole
FM AUX TRANSMITTER WITH 3.5MM PLUG ADAPTER
Champion E-Clip Suit 1/2 Shaft -50pk
Teng 7pc Fold-Up AF Hex Key Set - 1/16-7/32in
Teng 10pc Punch & Chisel Set w/ Wall Rack
Champion 4 x 16mm Metric Woodruff Keys -8pk
ITM Push Girder Trolley-3 Ton-100-305mm Beam Width
FITTING KIT HYUNDAI SONATA 2006 - 2008 DOUBLE DIN (BLACK)
M7 5pc Chisel Set 175mm Long To Suit SC211C & SC212C
FITTING KIT METRA TOYOTA, SUBARU SIDE TRIM 2000 ON DOUBLE DIN (BLACK)
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
SCALE MODELLERS SUPPLY SYNTHETIC MICRO DETAILING BRUSH SET 9PC
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Holemaker Uni Shank Tinite (Tin) Cutter 25mmx25mm
AMPLIFIED HARNESS TOYOTA 1992 - 2001 AMP RETENTION 15 PIN PLUG
Teng Die M3 x 0.5
Ehoma General Duty C-Clamp 250mm x 115mm 1200kgp
ITM Lever Hoist-Heavy Duty-3 Ton-1.5 Meter Lift
Ehoma Pivot Handle Clamp 300mm x 140mm 670kgp
AUTOMOTIVE BATTERY AGM 12V 12AH 620CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
Teng Open Ended Insert Spanner 14 x 18mm 38mm
FITTING KIT NISSAN SENTRA 2020 - UP DOUBLE DIN (GLOSS BLACK / SILVER TRIM)
AIRBRUSH PAINT 30ML COLOUR SHIFT EXTREME SUPERNOVA ACRYLIC LACQUER SCALE MODELLERS SUPPLY
HAIDA SNAP-ON LENS CAP 67MM 











