CC1915W3 – 15mm Band Width Retaining Clamps 19mm Diameter | W3 Features: Reinforced band tips for safety. Softened band edges. Wide variety of material and rubber options. Technical Spec: Band Width – 15mm Diameter – Ø 19mm Grade W3 – Stainless Band (1) Corrosion Resistance (min.Hour) IS0 9227 – 200 (2) (1) Band – 1.4016 Stainless DIN EN-10088-2 or equivalent (2) 10% red rust allowed on the total surface of W3 products after salt spray test Rubber Type – CR Colour – Black Temperature (C°) | -35 – +100 Ozone Resistance – Very Good Light Resistance – Very Good Fuel Resistance – Sufficent Oil Resistance – Good Alcohol Resistance – Good Acid Resistance – Good Base Resistance – Good KALE is certified with ISO TS 16949 ISO 9001 ISO 14001 management systems as per the expectations of the global automotive industry.
Related products
E-Clips & Retainer Springs
$24.68 incl. GST
Bolts, Set Screws & Nuts - UNF (Nyloc)
$14.81 incl. GST
Bolts, Set Screws & Nuts - UNC (Nyloc)
$14.70 incl. GST
Bolts, Set Screws & Nuts - UNF (Nyloc)
$15.33 incl. GST
Bolts, Set Screws & Nuts - UNC (Nyloc)
$15.96 incl. GST



AUTOMOTIVE BATTERY AGM 12V 12AH 600CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
Champion E-Clip Suit 3/32 Shaft -50pk
FORMULA SUCTION AIRBRUSH DUAL ACTION 0.5MM BLUE
Champion 4 x 16mm Metric Woodruff Keys -8pk
NITECORE LI-ION RECHARGEABLE 21700 BATTERY 5300MAH 3.6V
Teng 1/2in Dr. 24in / 600mm Power Bar
Teng 1/2in Ratchet Long Arm 45 Teeth 400mm
Stronghand Adjust-O Angle Magnet
Stronghand Adjust-O Magnet Square 45/ 90deg. 35KG
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
NITECORE NWL20 600 LUMEN MULTIFUNCTIONAL TRIPLE OUTPUT WORK LIGHT
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb L/R
SCALE MODELLERS SUPPLY SYNTHETIC BRUSH SET 5PC
DYNAMAT DYNACORE 1/2 HALF INCH 32" x 54" 1 SHEET
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk 