WSKTNRKS-I | Worksharp Rolling Knife Sharpener Features The Work Sharp Rolling Knife Sharpener is a handheld manual sharpener that uses a Magnetic Angle Block and Rotating Abrasives to quickly and easily sharpen your knives. The Magnetic Angle Block has four different sharpening angles (15° 17° 20° 25°) to sharpen a wide variety of knives from Folders Pocket Knives and Kitchen Knives to the optimum angle. The three abrasives coarse 320 Grit diamond fine 600 Grit diamond and fine ceramic hone – will restore your knives back to a razor-sharp edge. Place your knife against the Magnetic Angle Block on one of the pre-set angles. Starting with the Coarse Abrasive roll the abrasive along the cutting edge then quickly change to the finer abrasives to complete the process. Its that easy. Compact size easily fits into a kitchen drawer. Never struggle with a dull knife again. WHATS IN THE BOX? Safe and Ergonomic Rolling Sharpener Magnetic Angle Block With Four Sharpening Angles: 15° 17° 20° 25° Three Sharpening Abrasives: 320 & 600 Grit Diamond and Fine Ceramic Users Guide 3 Year Warranty Specifications Product Type: Knife Sharpener Sharpening Angles: 15° 17° 20° 25° Included Abrasives: Coarse 320 Grit Diamond Fine 600 Grit Diamond Fine Ceramic Weight: 3.3kg



Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Teng 26in ABS Parts Tray & Protector for Roll Cabs
Teng 9pc Standard Metric Hex Key Set - 1.5- 10.0mm
Panasonic 3V Lithium Coin Cell Battery (24mm X 5.0mm)- 5pk
Teng 1/4in Dr. Flex-Head Stubby Ratchet Handle 72T
Teng 9pc Long Arm TX Key Set - TX8-TX40
Teng 8pc TX Set With Ball Point End (Folding)
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
Teng 10pc 5.5mm Drill Bit (DIN338)
ITM Push Girder Trolley-1 Ton-64-203mm Beam Width
Teng T-Handle Hex Driver 6.0mm x 150mm (N)
ITM 240V Electric Hoist-3 Ton-6 Meter Lift
Holemaker Pilot Pin 6.34mmx102mm (15-52mm / 50mm DOC)
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
Holemaker Cutting Fluid 5 Litre
Drill Doctor Industrial 2.5-19mm Drill Bit Cap.
Holemaker Pilot Pin 6.34mmx127mm (19-32mm / 75mm DOC)
Holemaker Pilot Pin 4.73mmx102mm (12-14mm / 50mm DOC)
Champion M6 x 10mm Socket Head Cap Screw-Din912-Gr12.9 -10pk
Holemaker Cutting Fluid 20 Litre
Teng Barn Style Tool Box (450 x 200 x 200mm)
ITM Chain Block-Mini-250 kg-2 Meter Lift
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
Teng 10pc 4.2mm Drill Bit (Din338) 