Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI BLUE 400ML
$26.20 incl. GST
In stock
Related products
$199.95 incl. GST
$449.95 incl. GST
$429.95 incl. GST
$171.95 incl. GST



Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
FITTING KIT HONDA CRV 2017 - 2021 DOUBLE DIN (GLOSS BLACK)
Teng 9pc Long Arm TX Key Set - TX8-TX40
Teng 10pc 4.0mm Drill Bit (DIN338)
Champion 1/4in Male Air -Line Coupling Nitto
Holemaker Silver Series Annular Cutter 47mmx25mm DOC
Teng 1/2in Dr. 17in / 425mm Power Bar
Groz 3/8in BSP Air Filter 80CFM / 2250LPM
Champion 1/8in x 5/8in Roll Pin -20pk
Champion M12 x 22mm x 2.5mm Aluminium Washer - 50pk
Teng 10pc 5.5mm Drill Bit (DIN338)
NITECORE NWL20 600 LUMEN MULTIFUNCTIONAL TRIPLE OUTPUT WORK LIGHT
FM3000 COMPRESSOR CRANKCASE GASKET 



