Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI RMZ YELLOW 400ML
$26.20 incl. GST
Only 2 left in stock
Related products
$167.95 incl. GST
$429.95 incl. GST
$379.95 incl. GST
$60.95 incl. GST



Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
Champion Hose Joiner 90 deg Barb Elbow Reducer Brass 3/4-1/2
TacklePro Inchiku Lure 80gm - Red Terror
A110 Mitsuba A/13 Classical V-Belt
FITTING KIT FORD F150 2011 - 2012 DOUBLE DIN (PLATINUM HIGH GLOSS)
ProEquip Welders Angle Clamp Vice
Champion M18 x 28mm x 2.5mm Aluminium Washer - 50pk
Champion E-Clip Suit 7/16 Shaft -30pk
FITTING KIT HYUNDAI SONATA 2006 - 2008 DOUBLE DIN (BLACK)
Holemaker Cutting Fluid 1 Litre
FORMULA GRAVITY AIRBRUSH SINGLE ACTION 0.3MM 





