Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI RMZ YELLOW 400ML
$26.20 incl. GST
Only 2 left in stock
Related products
$449.95 incl. GST
$449.95 incl. GST
$199.95 incl. GST
$429.95 incl. GST
$379.95 incl. GST
$179.95 incl. GST
$59.95 incl. GST



A120 Mitsuba A/13 Classical V-Belt
Holemaker Sheet Metal Cutter Set 13 Piece 8-20mm
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
S5 PULL HANDLE
Teng 8pc TX Set With Ball Point End (Folding)
Groz 3/8in BSP Air Filter 80CFM / 2250LPM
Ehoma Pivot Handle Clamp 600mm x 175mm 700kgp
Champion 1/4in UNF Nylon insert Self-Locking Nut -25pk
Champion 3/8in Hose Barb Air -Line Coupling Nitto
Champion E-Clip Suit 5/32 Shaft -50pk
Teng 16in Canvas Tool Bag w/Metal Handle
AUTOMOTIVE BATTERY AGM 12V 12AH 600CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
DYNAMAT DYNACORE 1 INCH 32" x 54" 1 SHEET 





